Phillip Westendorf's Discussions (644)

Search Forum

View

Discussions Replied To (638) Replies Latest Activity

"Tungsten, I was planning to use a roller but after I used it on epoxy a few weeks ag…"

Phillip Westendorf replied Nov 22, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"I just finished the first of several coats of varnish to the outside of the hull.  I…"

Phillip Westendorf replied Nov 21, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"John, The hole is 0.0625" in diameter, that's a little on the small side.  With air…"

Phillip Westendorf replied Nov 19, 2013 to New here and looking to start my first drift boat

 11 Nov 20, 2013
Reply by John Weston

"Tungsten,   NOPE,  A few years ago I had a 15 ft. Alum boat set up for river fishing…"

Phillip Westendorf replied Nov 19, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Question..... Has anyone out there know of or have seen a hinged Seat frame for the…"

Phillip Westendorf replied Nov 18, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Josh,  Her's a pic of the waterproof air chamber on my canoe with the Beckson Deck P…"

Phillip Westendorf replied Nov 18, 2013 to New here and looking to start my first drift boat

 11 Nov 20, 2013
Reply by John Weston

"Josh,  It's not too difficult to build airtight compartments as Lawrence has suggest…"

Phillip Westendorf replied Nov 17, 2013 to New here and looking to start my first drift boat

 11 Nov 20, 2013
Reply by John Weston

"The hull is finally complete, as I mounted the sheer rails and chine logs these last…"

Phillip Westendorf replied Nov 17, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Dutch,  Very impressive looking job on the DB.  I can see your passion for these res…"

Phillip Westendorf replied Nov 15, 2013 to Crenshaw Restore.

 27 Nov 24, 2013
Reply by Adam "Dutch" Gottschling

"Ken,  If you have a canoe already, there's another simple solution.  Add a a set of…"

Phillip Westendorf replied Nov 12, 2013 to Pram Design Help Wanted/Needed!

 77 Nov 16, 2013
Reply by Ken Shindledecker

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service