Randy Dersham's Discussions (571)

Search Forum

View

Discussions Replied To (537) Replies Latest Activity

"Many suggest two layers of 10oz, Larry suggested the two layer approach for you also…"

Randy Dersham replied Jul 4, 2009 to Fiberglass cloth

 9 Jul 4, 2009
Reply by Randy Dersham

"Perfect Jason. Make sure to pre-drill the nail holes for the chine batten so the fi…"

Randy Dersham replied Jul 1, 2009 to Fiberglass bottom install

 4 Jul 2, 2009
Reply by Jason Knight

"We now use a 1/4 inch barrel nut screwed into the frame. Then we drill out about 3/1…"

Randy Dersham replied Jun 25, 2009 to Attachment from pipe for seat to the rib.

 7 Jun 28, 2009
Reply by Jason Knight

"The blush is not difficult to deal with, scrub down with acetone and a light sand be…"

Randy Dersham replied Jun 25, 2009 to Best Epoxy, System 3 vs West Marine?

 6 Jun 29, 2009
Reply by Jason Knight

"You are correct, how the rower reads the water and then handles the boat is the most…"

Randy Dersham replied Jun 20, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

"A boat does not need to be heavy to be stable, but it does need to have a proper dis…"

Randy Dersham replied Jun 20, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

"noooo, Christine is Jason's minister of ambiance and fellow angler. I think she's e…"

Randy Dersham replied Jun 15, 2009 to Closer...

 14 Jun 19, 2009
Reply by Steve Sobba

"Very sweet Jason. What a great job. You'll be turning a lot of heads. Super attentio…"

Randy Dersham replied Jun 14, 2009 to Closer...

 14 Jun 19, 2009
Reply by Steve Sobba

"Good job Robb. That repair looks very solid. I would love to see the final photos of…"

Randy Dersham replied Jun 14, 2009 to New Bottom and Chine on an Old Boat

 2 Jun 14, 2009
Reply by Robb Grubb

"I have not used Kevlar. I do order my fiberglass from Fiberglass Supply in WA. They…"

Randy Dersham replied Jun 14, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service