Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Question for everyone... Do you guys recommend Durabak for the inside and outside of…"

Guy Fredrickson replied May 28, 2012 to Durabak Prep and Application

 12 Jun 27, 2012
Reply by Randy Dersham

"That's an awesome looking boat. Congratulations for a job well done."

Guy Fredrickson replied May 28, 2012 to All done!

 17 Jun 9, 2012
Reply by Randy Dersham

"I am very tempted to remove the clamps from the transom and start working on the bot…"

Guy Fredrickson replied May 28, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Phil, As of today, I've gone through about 3.5 gallons.  I have a fresh gallon on ha…"

Guy Fredrickson replied May 28, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Today I installed the transom.  This was the sequence that I used.   1) Earlier in t…"

Guy Fredrickson replied May 27, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I was able to stop by the show this morning for a few hours.  It was great to meet t…"

Guy Fredrickson replied May 26, 2012 to Snake River Boat Show Posters

 9 May 30, 2012
Reply by Kevin C.

"Here are some pictures of the "all-thread" clamping fixture for the transom area.  T…"

Guy Fredrickson replied May 25, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Tonight I finished fitting the backer-board.  I'll epoxy and fasten it tomorrow.  I…"

Guy Fredrickson replied May 25, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Tonight I used a router to leveled the bottoms of the frames with the surfaces of th…"

Guy Fredrickson replied May 24, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I made a mistake above.  I meant to say that I will use the 206 hardener when I fibe…"

Guy Fredrickson replied May 24, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service