Ben Kittell's Discussions (120)

Discussions Replied To (91) Replies Latest Activity

"My chine log is now about a cm shorter then i measured. Can I still use this and jus…"

Ben Kittell replied Mar 8, 2011 to Chine log installation

13 Mar 10, 2011
Reply by Ben Kittell

"WOW not a good day in the garage! First I split one log, then the epoxy i mixed up t…"

Ben Kittell replied Mar 8, 2011 to Chine log installation

13 Mar 10, 2011
Reply by Ben Kittell

"Do you put 5200 just where the chine log and the sides of the boat touch? Or do you…"

Ben Kittell replied Mar 8, 2011 to Chine log installation

13 Mar 10, 2011
Reply by Ben Kittell

"The chine notches were not fully cut out in those pics. but they are now. I even san…"

Ben Kittell replied Mar 8, 2011 to Chine log installation

13 Mar 10, 2011
Reply by Ben Kittell

"So its looking like I may have gotten way too much 5200 and not enough epoxy, oh wel…"

Ben Kittell replied Mar 7, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"So what should I do for my compartments? Do I use 5200 as a glue to get a seal where…"

Ben Kittell replied Mar 7, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"I was hoping to be able to use tan 5200 as a fillet, but I am staining and oiling th…"

Ben Kittell replied Mar 6, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"Good advice. Wouldn't it also work to run some 5200 down the side edges of the frame…"

Ben Kittell replied Mar 5, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"What is the advantage of using nails over ss screws? Besides price?"

Ben Kittell replied Mar 5, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

"I am going to fiberglass over the out side. If I use nails do I lightly counter sink…"

Ben Kittell replied Mar 5, 2011 to Screw Distance

26 Mar 19, 2011
Reply by chris towles

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service