Ronald Shanks's Discussions (15)

Search Forum

View

Discussions Replied To (12) Replies Latest Activity

"I use a bowline knot directly to the anchor for all my boats (drift, sail, power).  …"

Ronald Shanks replied Nov 1, 2012 to Anchor security

 14 Nov 14, 2012
Reply by Rick Newman

"I just finished my Canadian 14' from Spira about a month ago.  My goal for this boat…"

Ronald Shanks replied Jun 6, 2012 to Fiberglass...

 3 Jun 8, 2012
Reply by lhedrick

""

Ronald Shanks replied May 1, 2012 to adjustable seat for river dory

 2 May 1, 2012
Reply by Herman McMulen

"I saw that Ultraply, but I need 3/8 for the sides, and 1/2 for the bottom.  I am bui…"

Ronald Shanks replied Jul 22, 2011 to Thoughts on pressure treated wood...

 11 Jul 22, 2011
Reply by Frank R

"Actually I do have access to Maple as well, but the cost is pretty steep, and I have…"

Ronald Shanks replied Jul 22, 2011 to Thoughts on pressure treated wood...

 11 Jul 22, 2011
Reply by Frank R

"I have the ribs all built using Ash right now, but before I toss them onto the jig a…"

Ronald Shanks replied Jul 22, 2011 to Thoughts on pressure treated wood...

 11 Jul 22, 2011
Reply by Frank R

"Thanks Frank, I did search around for older posts, but missed this one."

Ronald Shanks replied Jul 22, 2011 to Thoughts on pressure treated wood...

 11 Jul 22, 2011
Reply by Frank R

"I was searching through the archives, and came across this old post.  I have stopped…"

Ronald Shanks replied Jul 14, 2011 to Free MRBoats blueprints/plans

 8 Jul 15, 2011
Reply by Sandy Pittendrigh

"Both chines and gunwales - 18 feet was just a guesstimate since I will be scarfing 2…"

Ronald Shanks replied Jul 5, 2011 to Scarfing, Steaming & Cutting

 8 Jul 6, 2011
Reply by Seamus Walsh

"Do you just skip the steambox completely then....?"

Ronald Shanks replied Jul 5, 2011 to Scarfing, Steaming & Cutting

 8 Jul 6, 2011
Reply by Seamus Walsh

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service