Seamus Walsh's Discussions (14)

Discussions Replied To (11) Replies Latest Activity

"I just built that boat.  A 16' side does not fit, you need more.  Or I guess you cou…"

Seamus Walsh replied Aug 11, 2011 to Newbie Questions

5 Aug 11, 2011
Reply by John Greenleaf

"5/8 aluminum, cut using a chop saw or band saw.  I drilled a 1" hole and a 3/4" hole…"

Seamus Walsh replied Aug 9, 2011 to new boat pics

10 Aug 9, 2011
Reply by mlwebb

"I made it all by myself.  It was pretty easy.   let me know if you want to know how.…"

Seamus Walsh replied Aug 8, 2011 to new boat pics

10 Aug 9, 2011
Reply by mlwebb

"I re-lofted the boat based on Flecther's book, adding in the curved stem.  The stem…"

Seamus Walsh replied Aug 4, 2011 to new boat pics

10 Aug 9, 2011
Reply by mlwebb

"buy Fletcher's book and save the cash for a kevlar bottom, nicer hardware, or someth…"

Seamus Walsh replied Aug 3, 2011 to Meranti vs okoume?

11 Aug 9, 2011
Reply by mlwebb

"How long are you cooking your wood?  I go about 25min on an air dried/ wetish 1/2" p…"

Seamus Walsh replied Jul 6, 2011 to Scarfing, Steaming & Cutting

8 Jul 6, 2011
Reply by Seamus Walsh

"I haven't had a problem steaming glued up wood (epoxy).  I would dimension, scarf, s…"

Seamus Walsh replied Jul 6, 2011 to Scarfing, Steaming & Cutting

8 Jul 6, 2011
Reply by Seamus Walsh

"16" down from the oarlocks?   or 18" up from the floor?  By the way I am 6' tall.  I…"

Seamus Walsh replied Jun 17, 2011 to need answer quick!! rowing seat height

6 Jun 18, 2011
Reply by lhedrick

"here is a pic of the boat"

Seamus Walsh replied Jun 17, 2011 to need answer quick!! rowing seat height

6 Jun 18, 2011
Reply by lhedrick

"I am not sure exactly what your "oil" is.  I have heard it called "TLV"  this would…"

Seamus Walsh replied May 23, 2011 to Inside of the boat during painting

5 May 23, 2011
Reply by AJ DeRosa

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service