Sandy Pittendrigh's Discussions (59)

Discussions Replied To (56) Replies Latest Activity

"The only boat I know of that's 49" on the bottom is a Montana Riverboats Beavertail,…"

Sandy Pittendrigh replied Sep 15, 2020 to Question - side patch

10 Sep 21, 2020
Reply by Peter Honsberger

"Interesting.   Cool.  But 5200 is famous for being so permanent you have to saw thro…"

Sandy Pittendrigh replied Sep 15, 2020 to Caulk instead of glue

4 Sep 15, 2020
Reply by Jonathan Clarke

"I've been leaning this way for years.  The last few boats I've made (not framed) inc…"

Sandy Pittendrigh replied Sep 15, 2020 to Caulk instead of glue

4 Sep 15, 2020
Reply by Jonathan Clarke

"One more note on white water boats.  Most of the boats I've seen made an attempt to…"

Sandy Pittendrigh replied Mar 13, 2017 to Decked boat designs

20 Apr 7, 2017
Reply by lhedrick

"RE> Oar handles too high on a wider boat? That's the key question on wider boats.…"

Sandy Pittendrigh replied Mar 13, 2017 to Decked boat designs

20 Apr 7, 2017
Reply by lhedrick

"Jeremy Christensen and Larry Hedrick built two decked versions of the (my) Montana R…"

Sandy Pittendrigh replied Mar 13, 2017 to Decked boat designs

20 Apr 7, 2017
Reply by lhedrick

"Another good trip is from the highway bridge over the Judith, on the road between Le…"

Sandy Pittendrigh replied Jun 8, 2016 to Missouri River White Cliffs Trip

15 Jun 8, 2016
Reply by Sandy Pittendrigh

"This boat would rely on the strength of the mechanical screw bonding, of plywood to…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"Meranti is what I assumed.  Cheap enough and good enough.  I started out building wi…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"1/4" or perhaps 3/8" for the sides.  I'm thinking 3/8" 1/2" plywood for the bottom…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

RSS

© 2021   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service