Riverman's Discussions (84)

Search Forum

View

Discussions Replied To (70) Replies Latest Activity

"No silicone bronze screws in my area... and I hate to order stuff. smile"

Riverman replied Nov 18, 2010 to 17' Chinook Progress w/Pics!

 21 Nov 23, 2010
Reply by Jordan Davis

"Apparently, that West scarfer is not used on 1/2" plywood... everything I read shows…"

Riverman replied Nov 18, 2010 to Scarfing plywood...

 12 Dec 17, 2010
Reply by wade radina

"Looks good... what kind of screws are you using on the boat?"

Riverman replied Nov 18, 2010 to 17' Chinook Progress w/Pics!

 21 Nov 23, 2010
Reply by Jordan Davis

"Dave Z mentioned Cypress... my friend has a sawmill here and has a big truck load of…"

Riverman replied Nov 16, 2010 to Floor Boards

 16 Nov 18, 2010
Reply by Mike Baker

"I priced some fir lumber in the southeast... a 1x4x8' is $8.50 each."

Riverman replied Nov 16, 2010 to 17' Chinook Progress w/Pics!

 21 Nov 23, 2010
Reply by Jordan Davis

"Looks real good... what kind of wood is that?"

Riverman replied Nov 16, 2010 to 17' Chinook Progress w/Pics!

 21 Nov 23, 2010
Reply by Jordan Davis

"Welcome to the forum... I spent months searching the internet for drift boat plans,…"

Riverman replied Nov 14, 2010 to New to WBP!

 8 Nov 15, 2010
Reply by Jordan Davis

"I did not mean to use 1/4" only on the transom... just wondered how to glue it to a…"

Riverman replied Nov 11, 2010 to Boat Building Questions

 4 Nov 14, 2010
Reply by Riverman

"Maybe you're on to something there Kelly... a disposable boat business."

Riverman replied Nov 9, 2010 to Poor Guy Drift Boat

 22 Nov 11, 2010
Reply by Riverman

"Finally... I found a place just a 100-miles away that has marine plywood, fir lumber…"

Riverman replied Nov 9, 2010 to Poor Guy Drift Boat

 22 Nov 11, 2010
Reply by Riverman

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service