David Witton's Discussions (241)

Search Forum

View

Discussions Replied To (235) Replies Latest Activity

"A friend from Bend was able to get a quote on POC from Orepac. Perhaps a call to lum…"

David Witton replied Aug 26, 2015 to Dry Rot in Frames

 17 Aug 30, 2015
Reply by CWarmouth

"Mike - I didn't have any joint quality issues. One thing I didn't mention in the ear…"

David Witton replied Aug 8, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"The blue tape came off with a bit of heat - I'm hoping that heating and then cooling…"

David Witton replied Aug 8, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I took the traditional approach to the glueup, first saturating the joint with epoxy…"

David Witton replied Aug 8, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I left the sacrificial under layer in place, and ran a strip of blue tape across its…"

David Witton replied Aug 7, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"OK, now it's time to scarf some plywood. I've been scratching my head about how to m…"

David Witton replied Aug 5, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"After the frames were assembled, I borrowed a tip from Kurt Selisch and made a jig t…"

David Witton replied Aug 1, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Tungsten - great suggestion, I'm headed off to the store!"

David Witton replied Aug 1, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I had built kayaks back in the 70s using polyester resins, but I didn't have much ex…"

David Witton replied Jul 31, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I made a simple jig to cut the limber holes...and another to taper the frame sides"

David Witton replied Jul 27, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service