Eric Loudenslager's Discussions (125)

Discussions Replied To (123) Replies Latest Activity

"For class III and IV, a decked boat isn't really necessary.  Roger Fletcher's book h…"

Eric Loudenslager replied Jun 10 to 12 x 48 build?

9 Jun 10
Reply by Eric Loudenslager

"I'm a stitch and glue builder. From the posted pictures looks like you have a hull t…"

Eric Loudenslager replied Feb 27 to I'm in over my head

15 Mar 7
Reply by Bennett Yarbrough

"It is called cold molding. Typically used to form a curved hull....like on a sailboa…"

Eric Loudenslager replied Sep 25, 2017 to Thinking jet sled

6 Sep 27, 2017
Reply by Robert Puckett

"Take a look a Andy Hutchinson's picture "Woody". Stitch and glue 16' double ender us…"

Eric Loudenslager replied May 30, 2017 to Ideas on a 16' true double ender

3 Jun 3, 2017
Reply by Blake Docter

"The single-part alkyd marine enamels are sufficient for a drift boat, no need for a…"

Eric Loudenslager replied Mar 29, 2017 to painting the sides of my drift boat

30 Apr 11, 2017
Reply by Phillip Westendorf

"If the ez fillet is not completely cured you can go ahead and glass and epoxy over i…"

Eric Loudenslager replied Oct 13, 2016 to EZ Fillet and Epoxy

3 Oct 16, 2016
Reply by John Squire

"I believe Sandy is back to charging $25. This includes plans for three boats, the ho…"

Eric Loudenslager replied Sep 9, 2016 to Building a McKenzie drift boat

8 Sep 9, 2016
Reply by Mike Thomas

""

Eric Loudenslager replied Aug 28, 2016 to Odd question regarding paint, and clear coats.

13 Aug 30, 2016
Reply by Phillip Westendorf

"Also called "fiberglass print through". Not uncommon with an epoxy/fiberglass lamina…"

Eric Loudenslager replied Jul 29, 2016 to Fiberglass Creep

10 Aug 12, 2016
Reply by James Prepura

"I believe you will be OK with a 6:1 scarf on the edge material. I built using the MR…"

Eric Loudenslager replied Jul 29, 2016 to "Will this scarf hold?" (I know, I know, but gotta ask)

3 Aug 4, 2016
Reply by tungsten

RSS

© 2018   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service