Bill Craig's Discussions (33)

Search Forum

View

Discussions Replied To (26) Replies Latest Activity

"It's the 1/2 inch Wood Slicer blade from Highland Woodworking and is a variable 3-4…"

Bill Craig replied Aug 8, 2013 to Band Saw Scarf Jig

 4 Aug 8, 2013
Reply by Bill Craig

"No other tool needed. Just a little sanding to clean up the fuzzies and you are read…"

Bill Craig replied Aug 8, 2013 to Band Saw Scarf Jig

 4 Aug 8, 2013
Reply by Bill Craig

"Jason: I fish all those Michigan  rivers too. On the Manistee below Tippy I have use…"

Bill Craig replied Aug 2, 2013 to Z's Drifter Pram

 62 Mar 9, 2017
Reply by Bennett Yarbrough

"I am also building this SUP. Cut out the ribs and spine and found some discrepancy i…"

Bill Craig replied Jul 31, 2013 to Wood SUP

 10 Oct 15, 2013
Reply by Greg Max

"www.dhdriftboats.com It is a Don Hill 16 ft boat."

Bill Craig replied Jul 31, 2013 to Outboard motor for my drift boat

 24 Jul 31, 2013
Reply by Mark Heskett

"I'm fishing the Manistee river in MI below Tippy dam. Not as turbulent as those west…"

Bill Craig replied Jul 31, 2013 to Outboard motor for my drift boat

 24 Jul 31, 2013
Reply by Mark Heskett

"The plans for my drifter suggest a Doel Fin if an outboard motor is mounted. They cr…"

Bill Craig replied Jul 25, 2013 to Outboard motor for my drift boat

 24 Jul 31, 2013
Reply by Mark Heskett

"I don't have a dog but I like the beer idea."

Bill Craig replied Jul 3, 2013 to Turning the Boat Over

 7 Jul 4, 2013
Reply by Terry E Walsh

"Used the hack saw today with a 32 tpi blade as Dave Z suggested. Worked much better.…"

Bill Craig replied Apr 29, 2013 to Cutting chine log slots

 7 Apr 29, 2013
Reply by Bill Craig

"Good tip. I was using a pull saw but it's too flexible. I wsas going to try a hack s…"

Bill Craig replied Apr 28, 2013 to Cutting chine log slots

 7 Apr 29, 2013
Reply by Bill Craig

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service