My first glimpse of a drift boat was on the Cal Salmon as a kayaker in the late 70s - i was intrigued by the way the boat rode through the wave trains and could handle the water. I got a better look a bit later on a couple of Rogue trips, watching them through Blossom Bar... I thought I'd like to try that. The idea of building one was cemented a few years ago after a visit to Andy Hutchinson's shop and seeing his build of a decked boat in sapele - what a beautiful boat. So as a start, I got Roger's book and built a model, getting an idea of how things went together and where the challenges might be. This spring, I traveled to Flagstaff to attend Brad Dimock's class, where I met an incredible variety of skilled folks, all interested in building - not to mention a shop to die for. Then it was off to Oregon and the wooden boat festival. I stopped in Bend, where I picked up a trailer and a bunch of great information from Mike Baker - now I had a trailer, and needed a boat. Materials were a bit of a challenge - I originally wanted Port Orford Cedar for the frames - in Bend, there's a reliable supply from Orepac, but in Victor, where I live, no such luck. I ended up with Alaskan Yellow Cedar for about $7/bf. Hydrotek was next on the list. McBeath lists it on their web page, but there was a 2 month wait, so I ended up getting mine from Edensaw. Following Brad's lead, I'm using epoxy from Resin Research. Now for the fun stuff...