Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,013)
| Discussions | Replies | Latest Activity |
|---|---|---|
Ipe Brazilian hardwood - has anyone used this??Hello all - I was strolling through a local lumber store and came across some long lengths of Ipe Hardwood. After a little research, it tur… Started by Greg Jensen in General Forum |
9 |
Apr 10, 2012 Reply by Rob Zelk |
last layers of exterior glass finally doneHello all, Just spent the better part of the day laying down the last of the exterior glass on my boat, thought I would share some pics, as… Started by Greg Jensen in General Forum |
1 |
Apr 10, 2012 Reply by Guy Fredrickson |
Bow Eye/UHMW Oarlock SleevesHey, I'm getting near the end of my bottom replacement (one year, later) and I'm looking for a bow eye and the UHMW oar lock sleeves like R… Started by Jack Rose in General Forum |
14 |
Apr 10, 2012 Reply by Randy Dersham |
Oar RecommendationI am getting close to being finished with one of Dave Z's drifters. I need to get a set of 8' oars. I just don't want to tie up time righ… Started by Ron Shealer in General Forum |
3 |
Apr 10, 2012 Reply by Ron Shealer |
Best Hole Filler....lots to fill.Below is a picture of the project I'm working on. I took the chine caps off and ended up taking off the bottom as well and am going to rep… Started by Jon Darrohn in General Forum |
7 |
Apr 9, 2012 Reply by Jon Darrohn |
Grand Canyon DoryAlmost there...Built with patterns from High Desert Dories (Andy H.) - Grand Canyon Dory w/ Transom, 16'10" X 48 Started by Jeremy Christensen in General Forum |
1 |
Apr 9, 2012 Reply by Guy Fredrickson |
WAITING.... ALLWAYS WAITING.....This sizes up my feelings of the last 6 weeks of waiting for resin to cure... Started by Greg Jensen in General Forum |
1 |
Apr 9, 2012 Reply by tungsten |
ADHESIVES. HELP....I will be installing my gunwale's soon and I don't really want to use 5200 for this. Is there another type of adhesive that works well, but… Started by Greg Jensen in General Forum |
8 |
Apr 8, 2012 Reply by sanderson |
McKenzie River Wooden Boat Show PosterThank you Rick for covering for me while I was away. Here is this year's poster. I hope to see you all soon. Started by Randy Dersham in General Forum |
15 |
Apr 7, 2012 Reply by Kurt Selisch |
Tatman 17.5' McKenzie value?Hey folks. I was wondering if some of you could weigh in on the value of my 17.5 ft Tatman with trailer. I built it in about 1995-6 and mys… Started by Russ Pickering in General Forum |
2 |
Apr 4, 2012 Reply by mitchell |
© 2025 Created by Randy Dersham.
Powered by
