Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,013)
| Discussions | Replies | Latest Activity |
|---|---|---|
Oil on various boat partsI have already begun to refurb my new old boat and have some questions about oiling. I would like to make this boat as low maintenance as… Started by Andrew in General Forum |
2 |
Apr 30, 2012 Reply by Andrew |
Big Water Little BoatsHi all, got s phone call from Martin Litton yesterday. I had sent him a copy of the new book BIG WATER LITTLE BOATS, about river running in… Started by Tom Martin in General Forum |
1 |
Apr 29, 2012 Reply by Tom Martin |
Penetrating EpoxiesDoes anyone have much experience with trying to saturate and strengthen old sun-dried and/or slightly rotted plywood with penetrating epoxy… Started by Brad Dimock in General Forum |
7 |
Apr 28, 2012 Reply by Don Hanson |
baby needs a new pair of shoesHi Everyone, My UHMW shoe was looking pretty bad so I pulled it off this afternoon and I need to replace it. Unfortunately the boat is kept… Started by Kurt Selisch in General Forum |
8 |
Apr 27, 2012 Reply by Jack Rose |
Build Nearing Final StagesI have been either working on a place for this drift boat or on the boat itself for three years. Here are a few teaser pictures of some of… Started by Rick Newman in General Forum |
25 |
Apr 27, 2012 Reply by Jack Rose |
Lap Joint vs. traditional scarf for joing two big bottom piecesAs I get closer to putting a new bottom on my boat I am leaning towards doing a lap joint to combine the two 4' x 8' marine grade plywood s… Started by Jon Darrohn in General Forum |
9 |
Apr 26, 2012 Reply by Greg Jensen |
Oar Stops/Wraps QuestionHey...I have a vintage Tatman boat I am prepping for some adventures...and need oar advice. I have 3 wooden Gull oars that I have to refin… Started by Christopher M. Gosselin in General Forum |
6 |
Apr 24, 2012 Reply by Christopher M. Gosselin |
FLOOR BOARDS - NEEDED OR JUST HISTORICHello all - I just read a post by Rob Grubb regarding the neccessity of floor boards in drift boats, and would really like to get some thou… Started by Greg Jensen in General Forum |
3 |
Apr 23, 2012 Reply by Robb Grubb |
Materials QuestionsThanks again to all that suggested I buy Roger Fletchers book. Loaded with info! So I have decided to build the Original Mackenzie Do… Started by Brian Schiller in General Forum |
16 |
Apr 21, 2012 Reply by Eric Loudenslager |
Floor boardsAt the point where I need to make some floorboards for my 17' Don Hill FF. I plan on using CVG Doug Fir at about 1/2" thickness. The plan… Started by Chuck Gower in General Forum |
6 |
Apr 21, 2012 Reply by Lawrence E. Long |
© 2025 Created by Randy Dersham.
Powered by
