Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,013)
| Discussions | Replies | Latest Activity |
|---|---|---|
Backwards TraileringQuestion. I have noticed some boats on trailers with the transom end of the boat at the winch. Just curious as to why some boats are towed… Started by Jason Knight in General Forum |
3 |
May 20, 2009 Reply by Mike Dearing |
big boatfinally finished the 19x54 here are a couple of photos. Started by sanderson in General Forum |
11 |
May 20, 2009 Reply by Dan Burr |
"Fish on"... Parade??There is something special about small town parades. Marching bands with mis-matched uniforms, big men in tiny cars wearing "Fez", parade q… Started by Greg Hatten in General Forum |
5 |
May 19, 2009 Reply by Greg Hatten |
Rowing seatI am in the middle of rebuilding my rowing seat, just a few questions for the experts, is the wood pine? why not use a nice ash or oak dowe… Started by Dan Burr in General Forum |
12 |
May 19, 2009 Reply by Dan Burr |
Customizing CoronaI have been spending a lot of time this past spring doing a some things on Corona that I always wished I had. (Thanks to Greg Hatten and ot… Started by Travis Gillespie in General Forum |
1 |
May 18, 2009 Reply by Greg Hatten |
Varnish QuestionI started putting some coats of varnish on the rails, seat parts, etc. My question is, how many coats of varnish is the standard for handra… Started by Jason Knight in General Forum |
5 |
May 18, 2009 Reply by Jason Knight |
5200 or Gel Magic?So when it comes time for attatching the ribs to the sides of the boat, in the 08' McKenzie drift manual on page 30 it has a picture of a f… Started by Jared Lane in General Forum |
7 |
May 17, 2009 Reply by Randy Dersham |
bow stem protection plate?while attending the recent boat show I noticed that a few had bow stop protection plate. Some where uhmw and some stainless. My new baker t… Started by mitchell in General Forum |
2 |
May 16, 2009 Reply by Dave Z |
temps and EpoxyBeen reading historic discussions on epoxy and cold weather. Building in my barn and temps are still getting down into the 40's at night.Th… Started by PATRICK M CLEAREY in General Forum |
1 |
May 15, 2009 Reply by Randy Dersham |
OarlocksLooking for a supplier of oarlocks, etc. in Northern Idaho or Washington. Looking for reccommendations from anyone who has done business wi… Started by Richard in General Forum |
12 |
May 14, 2009 Reply by Rick Newman |
© 2025 Created by Randy Dersham.
Powered by
