"There are some pictures of a scarfing setup here"
Wooden Boat People
By McKenzieDriftBoat.com
Michael S. Gural's Discussions
help with building don hill 16'
6 Replies
Hi All,has anyone built a don hill driftboat? would love to be able to call you with some questions.Thanks,New Mexico MikeContinue
Started this discussion. Last reply by David Witton Sep 20, 2021.
Michael S. Gural's Page
Latest Activity
Bodacious Jack replied to Michael S. Gural's discussion help with building don hill 16'
"I built an approx 3.5 square foot jig where the front was 3.5 inches lower and ran a 2x6 back and forth over it with my router bolted to the 2x6. It was easy for me. instructions are online somewhere with a video. test on cheap…"
James Prepura replied to Michael S. Gural's discussion help with building don hill 16'
"Hi mike
I had stained my plywood before anything, my advice and mine only is to either scarf it first and epoxy it together but if you don't sand it well enough it will not take the stain next to the glue joint.
I stained mine first and…"
Bennett Yarbrough replied to Michael S. Gural's discussion help with building don hill 16'
"I guess it depends on the transit method, but I’d probably just sandwich it between some osb if you’re just trailering it somewhere. Three coats of epoxy seems excessive, one would probably be fine if you’re inclined.…"
Michael S. Gural replied to Michael S. Gural's discussion help with building don hill 16'
"hi,
moving and want protect plywood in transit,can I puy 3 coats of epoxy on now after staining and still bend it late when I start the build without it spiderwebbing?
west system 207
any links to making scarf joint jig?
THANKS for your Help
Mike…"
Bennett Yarbrough replied to Michael S. Gural's discussion help with building don hill 16'
"Not a don hill, but a framed boat none the less! What are you wondering so far?"
Profile Information
- Hometown:
- long valley,nj
- About Me:
- Self Employed carpenter,beginner fly fisher
- Boats I own:
- just built 16' mcken.river drifter
Michael S. Gural's Blog
meranti plywood and west system epoxy cheap
Great Deal for boat builders, 1200. worth of materials for 575.
1/2 inch meranti paid 220. a sheet front range lumber Denver
1/4 meranti ply 110. a sheet
west resin 126 oz /42 oz 207 hardener 275.
don hill plans 16 standerd 100.
rib lumber hem fir clear 220.
1250. cost sell for 575. cash
098-246-4179 mike Las vegas,New Mexico
Posted on September 10, 2021 at 5:11pm
meranti ply west epoxy for sale
Changed my mind,moving forces sale of meranti plywood 2- 1/2'' sheets and two 1/4 inch sheets
west system epoxy 126 oz 105 resin and 42 oz 207 hardener,hem-fir 1x4 clear for ribs
Las Vegas,NEW MEXICO 600.firm Mike 908-246-4179
Posted on September 9, 2021 at 5:32am
Comment Wall
- No comments yet!
© 2024 Created by Randy Dersham.
Powered by
