custom drift boat trailer

Hello,I'm starting to build a custom trailer for my driftboat.I know many of the features I want and have looked at every single picture on this site,many good ideas found.Does anyone have additional ideas? Now is the time before it is ready for paint thank you,Jay.

Views: 2537

▶ Reply to This

Replies to This Discussion

Permalink Reply by JAY STRUGNELL on February 4, 2013 at 9:35pm

I agree about the spring rate,most are way too stiff,and on the softer tire on the tongue jack,but even the heavy dudy ones come with hard plastic wheels.

Permalink Reply by JAY STRUGNELL on February 18, 2013 at 9:02pm

Made some progress on my trailer this weekend;then took a break and cought these!

Attachments:
Permalink Reply by Tom Anderson on February 18, 2013 at 10:01pm

Wow those are beautiful bright fish! Sure wish we had a local winter run going here right now.

The trailer looks great.  What is the round tube and hole below for?

Permalink Reply by JAY STRUGNELL on February 19, 2013 at 6:07pm

The tube is just a left over scrap,the hole is for led clearance light,it will have large steps on both sides of the fenders and led lighting thoughout. I fished on foot about five hours,hooked three fish before I landed one;they would make several jumps in a row,one time actually leaving a loop of my line in air then flipped the hook out and almost hit me in the chest!

Permalink Reply by JAY STRUGNELL on June 19, 2013 at 7:48pm

Well took a long time, but more progress to show; see attach. Thank You Jay.

Permalink Reply by JAY STRUGNELL on June 23, 2013 at 9:53pm

Sorry, photos didn't load, put a few in photo section, have more if anyone is interested.

Permalink Reply by JAY STRUGNELL on August 18, 2013 at 3:38pm

got it just about done; see photos in photo section.

Permalink Reply by tungsten on August 19, 2013 at 6:42am

I like the look of the tires so close to the fenders,kinda lowrider.Any trouble with tires rubbing?

Permalink Reply by JAY STRUGNELL on August 19, 2013 at 8:07pm

Thank You, Ya I dislike being able to see daylight between fender and tire;it actually has over an inch and a half clearance to the bottom of the fender,but its very close on the sides and hits very lightly every once in a while.

Permalink Reply by Phillip Westendorf on August 19, 2013 at 8:19pm

Jay,

Nice job on the trailer, I like the color too.  Won't have any trouble finding it in the parking lots along the rivers.

Dorf

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service