Bow Eye/UHMW Oarlock Sleeves

Hey, I'm getting near the end of my bottom replacement (one year, later) and I'm looking for a bow eye and the UHMW oar lock sleeves like R…

Started by Jack Rose in General Forum

Oar Recommendation

I am getting close to being finished with one of Dave Z's drifters.  I need to get a set of 8' oars.  I just don't want to tie up time righ…

Started by Ron Shealer in General Forum

Best Hole Filler....lots to fill.

Below is a picture of the project I'm working on.  I took the chine caps off and ended up taking off the bottom as well and am going to rep…

Started by Jon Darrohn in General Forum

Grand Canyon Dory

Almost there...Built with patterns from High Desert Dories (Andy H.) - Grand Canyon Dory w/ Transom, 16'10" X 48

Started by Jeremy Christensen in General Forum

WAITING.... ALLWAYS WAITING.....

This sizes up my feelings of the last 6 weeks of waiting for resin to cure...

Started by Greg Jensen in General Forum

ADHESIVES. HELP....

I will be installing my gunwale's soon and I don't really want to use 5200 for this. Is there another type of adhesive that works well, but…

Started by Greg Jensen in General Forum

McKenzie River Wooden Boat Show Poster

Thank you Rick for covering for me while I was away. Here is this year's poster.  I hope to see you all soon.

Started by Randy Dersham in General Forum

Tatman 17.5' McKenzie value?

Hey folks. I was wondering if some of you could weigh in on the value of my 17.5 ft Tatman with trailer. I built it in about 1995-6 and mys…

Started by Russ Pickering in General Forum

Pierre's Devlin Egret

Started by MADMAN...across the water in General Forum