Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,017)
| Discussions | Replies | Latest Activity |
|---|---|---|
who has the best drift boat plans for a beginerI have been looking at alot of web sites at the plans they have for sale, and i as wondering what you guys would recomend for a first time… Started by brandon hollaway in General Forum |
6 |
Jun 30, 2009 Reply by brandon hollaway |
Best Epoxy, System 3 vs West Marine?Ok what is everyones vote, System 3 or West Marine. Also I am already in the hole on some west marine becuase defender is having a sale, ep… Started by Joseph Podesta in General Forum |
6 |
Jun 29, 2009 Reply by Jason Knight |
Almost done, what do ya think?Scratch built form Rogers plans. I have $1571.83 into it. A little over 83 hours. I've kept very good track of the money and time. (I'm a… Started by Dave Z in General Forum |
10 |
Jun 28, 2009 Reply by brandon hollaway |
Attachment from pipe for seat to the rib.I am looking for suggestions on what type of attachment to use from the front seat pipe to the rib for my boat. I have looked at some galva… Started by Bryan McDade in General Forum |
7 |
Jun 28, 2009 Reply by Jason Knight |
How to repair plywood side of 16ft drift boat when boat rolled over lead anchor in thunderstorm on DeschutesSide of 16 ft drift was punched in after boat flew out of water in thunderstorm on June 4. and rolled over lead anchor. The outside will be… Started by Steve Siler in General Forum |
5 |
Jun 24, 2009 Reply by Steve Siler |
Considering Selling My Wood BoatI built a Tatman 17' boat in the early 1990's. I've used it maybe 10 times since. I'd consider it in excellent condition. It also has a nic… Started by Mike O'Connor in General Forum |
6 |
Jun 23, 2009 Reply by Jesse Ronnow |
Oar size AgainI have read the discussions of April for a 16 x 48 driftboat oars. My project is 18 foot with an 80 inch beam. I have purchased 1 and 15/16… Started by Steve Sobba in General Forum |
2 |
Jun 23, 2009 Reply by Steve Sobba |
Anyone build a freestone classic from Montana Boat Buiders?I have decided to go that route and now I am waiting for the plans. Anyone have any input on building that model. I went with the 15', plan… Started by Joseph Podesta in General Forum |
1 |
Jun 22, 2009 Reply by Jason Knight |
KevlarI am going to build a stich and glue 14' drifter. I want to build a boat that does not wiegh a ton but is very strong and has a reinforced… Started by Joseph Podesta in General Forum |
13 |
Jun 20, 2009 Reply by Randy Dersham |
Closer...Ok - So have the decided that I wanted to varnish the exterior of hull instead of paint. I have managed a few coats and learned a bit about… Started by Jason Knight in General Forum |
14 |
Jun 19, 2009 Reply by Steve Sobba |
© 2025 Created by Randy Dersham.
Powered by
