Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,017)
| Discussions | Replies | Latest Activity |
|---|---|---|
Where's your spare??Where do you keep those "spare parts"... spare oar, spare oar lock... etc. I may have posted a few of these previously so forgive me if I'm… Started by Greg Hatten in General Forum |
7 |
May 25, 2009 Reply by Jonathan Clarke |
permanent oarlocks problems vs removableAs a mariner, I was trained to always remove oarlocks the moment they are not in use. It only takes a couple of seconds to remove or replac… Started by Den in General Forum |
7 |
May 24, 2009 Reply by Karl Mueller |
Interlux Brightside Polyurethane paint questionHi All, am using Interlux Brightside Polyurethane paint, and was VERY suprised to get back to the boatshop after a week away at work to fin… Started by Tom Martin in General Forum |
2 |
May 23, 2009 Reply by Tom Martin |
Full Size Spare?Ok so I suppose I am going to need some oars for my boat. I am pretty sure 9' Sayer Lights are going to be the oar... Question is - do I g… Started by Jason Knight in General Forum |
7 |
May 20, 2009 Reply by Randy Dersham |
Backwards TraileringQuestion. I have noticed some boats on trailers with the transom end of the boat at the winch. Just curious as to why some boats are towed… Started by Jason Knight in General Forum |
3 |
May 20, 2009 Reply by Mike Dearing |
big boatfinally finished the 19x54 here are a couple of photos. Started by sanderson in General Forum |
11 |
May 20, 2009 Reply by Dan Burr |
"Fish on"... Parade??There is something special about small town parades. Marching bands with mis-matched uniforms, big men in tiny cars wearing "Fez", parade q… Started by Greg Hatten in General Forum |
5 |
May 19, 2009 Reply by Greg Hatten |
Rowing seatI am in the middle of rebuilding my rowing seat, just a few questions for the experts, is the wood pine? why not use a nice ash or oak dowe… Started by Dan Burr in General Forum |
12 |
May 19, 2009 Reply by Dan Burr |
Customizing CoronaI have been spending a lot of time this past spring doing a some things on Corona that I always wished I had. (Thanks to Greg Hatten and ot… Started by Travis Gillespie in General Forum |
1 |
May 18, 2009 Reply by Greg Hatten |
Varnish QuestionI started putting some coats of varnish on the rails, seat parts, etc. My question is, how many coats of varnish is the standard for handra… Started by Jason Knight in General Forum |
5 |
May 18, 2009 Reply by Jason Knight |
© 2025 Created by Randy Dersham.
Powered by
