Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,017)
| Discussions | Replies | Latest Activity |
|---|---|---|
DraftI am curious as to the draft of the various boats that have been built from this forum. Started by Stephen Chase in General Forum |
20 |
May 8, 2009 Reply by Mike Dearing |
cypressI know it is a pretty good wood for use outside. Pee-rows are typically made from it in the south. I make my bee hives out of cypress becau… Started by Dave Z in General Forum |
4 |
May 8, 2009 Reply by Dave Z |
new blog reportSorry I'm behind on posting! It is spring- turkey season, dry flies everywhere and light out till 9pm! I love May! I have been making great… Started by Dave Z in General Forum |
0 | May 7, 2009 |
Woodie Hindman's 14 ft Double EnderAfer looking at the pictures/plans in Roger Fletches book, this little boat might be next winters project. Never built a framed boat, but h… Started by Lawrence E. Long in General Forum |
3 |
May 6, 2009 Reply by Mike Dearing |
Seat HeigthWonder if someone could give me a measurement off their boats from the bottom of the floor to the top of their rower seat. Any info would b… Started by Jim Rubino in General Forum |
12 |
May 6, 2009 Reply by Jim Rubino |
engine shaft length and hp for a 16' TatmanHi Everyone, I'm new to the forum and have already enjoyed reading all of the posts. Great site! Can anyone tell me what engine shaft lengh… Started by Al in General Forum |
3 |
May 5, 2009 Reply by Al |
Shortening a Transomed Double EnderI have been checking out the plans for a 16' transomed doubled ender. I want to build one this summer. However, I only want a 14 foot boat.… Started by Stephen Chase in General Forum |
5 |
May 5, 2009 Reply by Roger Fletcher |
Epoxy Blush and sandingI'm finishing glassing up my sides and am wondering about blush. I've rolled out a saturation coat of epoxy on the sanded wood, then squeeg… Started by Brian in General Forum |
1 |
May 3, 2009 Reply by Lawrence E. Long |
Railing for 18' drift boatOnce again wooden boat people, thanks so much for your help. I am wondering what people are using for railings. I am building a 18' drift b… Started by Bryan McDade in General Forum |
8 |
May 3, 2009 Reply by Lawrence E. Long |
Authentic Day on the "Mac"After the Boat Festival, we had a special guest in Eugene to perform in the "traveling" Broadway Show - Spamalot. We fished "old school" -… Started by Greg Hatten in General Forum |
2 |
May 2, 2009 Reply by Greg Hatten |
© 2025 Created by Randy Dersham.
Powered by
