Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
Repair and decking of an 18 footerI found this Dory in Moab in 2005 and dragged it home to SLC. She was built in Salt Lake in 96 wood and glass, I believe a MacKenzie desig… Started by Mike Morris in General Forum |
10 |
Jul 7, 2015 Reply by joe nielson |
Blue River Drift BoatsI grew up 2 miles up the valley from Blue River, so I'm calling this one a Blue River Drift Boat even though I live in Victor Idaho now. I… Started by Richard Elder in General Forum |
10 |
Jul 6, 2015 Reply by Ants Uiga |
Extending a 16' design to 17'Hi all, I'm building a drift boat for the first time and picked up drift boats and dorries. I was wondering if anyone had experience with… Started by Charles Asmus in General Forum |
15 |
Jun 23, 2015 Reply by Gregg Maddock |
Dave's Drift Pram 2.0- prototype buildI have been busy building this boat. Going very well. Decided to use all fir on this one. Don't be alarmed on those footballs on the ext… Started by Dave Z in General Forum |
10 |
Jun 23, 2015 Reply by Rick Newman |
Dave's Pickup Pram- FREE PLANS!- REV2-FIXEDGuys, There was a big error on the frames in version 1. I got out the boat and the models and my drawings and cannot figure out why I dre… Started by Dave Z in General Forum |
19 |
Jun 22, 2015 Reply by Joe Pelletier |
1960 Wolverine by WagemakerIMG_1057.JPGIMG_1068.JPGIMG_1067.JPGIMG_1069.JPGHello everyone I need some help I have a 1960 Wolverine by Wagemaker that I am looking to s… Started by Mark in General Forum |
1 |
Jun 20, 2015 Reply by Rick Newman |
Randy - you got your ears on? Over.Paging Randy Dersham...sent you a PM but didn't hear back. Can you still provide plans for the Tatman 17.5 highside? Hope all is well, J… Started by Jeremy Christensen in General Forum |
3 |
Jun 14, 2015 Reply by Jerry Sweat |
Refinishing Sawyer Smoker Ash Dory OarsLooking for a recommendation on a quality spar varnish to use for this project. I have used a general hardware store brand varnish in the… Started by Mac Dukart in General Forum |
14 |
May 26, 2015 Reply by Phillip Westendorf |
uhmw-peI thought that I should pass this on to everyone. I found a good supplier for uhmw. Crown plastics @ Harrison Ohio = a mfgr.of snowboard bo… Started by Mike Wilcox in General Forum |
3 |
May 17, 2015 Reply by Mike Wilcox |
Oars - what steps to find a sweet spotUnderstanding oars on a drift boat is not easy. In fly fishing, if the rod and reel balance at the front of the grip, rod use is balanced… Started by Ants Uiga in General Forum |
17 |
May 15, 2015 Reply by Rick Newman |
© 2024 Created by Randy Dersham.
Powered by
