Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
adjustable oarlock mountsHI I WAS WONDERING IF ANYBODY CAN TELL ME WHERE I CAN BUY ADJUSTABLE OARLOCKS? I HAVE SEEN PICS OF UP TO THREE HOLE IN ONE BLOCK. IS IT SOM… Started by marty whipple in General Forum |
11 |
Aug 15, 2015 Reply by chris towles |
Rub Strip RemovalLooking for some advice on how to the rub strip from my Keith Steele boat. It looks to be nailed on. It is coated with a lot of paint so I… Started by CWarmouth in General Forum |
14 |
Aug 12, 2015 Reply by CWarmouth |
First Boat Build, Is Pine ok for framesThis is our first boat build a Double Ender with Transom. We cut our frames out of yellow pine some being radiate pine. Will his wood be… Started by Justin McEntire in General Forum |
4 |
Aug 5, 2015 Reply by Mike Thomas |
hull assemblygot most of the hull assembled yesterday all the frames screwed in and stern/stem post in Started by Dustin Adams in General Forum |
41 |
Aug 5, 2015 Reply by Justin McEntire |
ToolsHi all, getting close to starting a build of a Briggs based on Andy H's plans. Any tools out there that anyone has found helpful that isn't… Started by Mike Eichorn in General Forum |
11 |
Aug 4, 2015 Reply by Mike Thomas |
Sapele marine plywood searchHello, Does anyone know of a west coast supplier of Sapele marine plywood? Searches online only bring up east coast distributers. Hoping to… Started by Kurt Selisch in General Forum |
8 |
Aug 1, 2015 Reply by Kurt Selisch |
Bottom Coating for Wooden Boats.Hey folks I just was reading another forum's posting on alternate sealants and coatings and it struck me that this may be another option fo… Started by Phillip Westendorf in General Forum |
7 |
Jul 25, 2015 Reply by Don Hanson |
Checked Wood and VarnishHello all, Long time lurker here finally making a first post. So I bought my first boat! Its in pretty good shape for the most part, no le… Started by Brett McKinnon in General Forum |
7 |
Jul 24, 2015 Reply by Brett McKinnon |
PFDWhat brand of PFDs are you guys using? Need some input, comfort, cost, etc. Any help would be greatly appreciated. Started by Mel Buchanan in General Forum |
7 |
Jul 20, 2015 Reply by Mike Eichorn |
Epoxy questionSo I'm at the point of my build where I need to apply a coat of epoxy to the sides before assembly. My question is this, system three resin… Started by Mel Buchanan in General Forum |
6 |
Jul 18, 2015 Reply by Mel Buchanan |
© 2024 Created by Randy Dersham.
Powered by
