lhedrick's Discussions (325)

Search Forum

View

Discussions Replied To (307) Replies Latest Activity

"On white water boats we usually lash them to the gunwale.  On my fishing boat I have…"

lhedrick replied Feb 2, 2011 to Spare Oar Transport

 14 Feb 8, 2011
Reply by Hal Jaeke

"I have built decks with 1/4 inch plywood applying 10 oz glass top and bottom.  Hatch…"

lhedrick replied Feb 2, 2011 to Another Newbie Needs Advice

 20 Feb 5, 2011
Reply by Ben Kittell

"Ben,   With all those frames, bulkhead, decks and hatches with 3/8 and 1/2 inch plyw…"

lhedrick replied Feb 2, 2011 to Another Newbie Needs Advice

 20 Feb 5, 2011
Reply by Ben Kittell

"1000 for a bottom cover, that is pricy.   Thanks for the information on the subject.…"

lhedrick replied Jan 24, 2011 to Installing UHMW bottom

 20 Feb 16, 2011
Reply by Terry E Walsh

"This is just for discussion.   A while back I am sure I came across someone who said…"

lhedrick replied Jan 23, 2011 to Installing UHMW bottom

 20 Feb 16, 2011
Reply by Terry E Walsh

"Like you mentioned, I used Neoprene strips.  I got it in 25 foot rolls about 1 inch…"

lhedrick replied Jan 22, 2011 to Dry compartment gasket material?

 4 Jan 22, 2011
Reply by lhedrick

"Kelly,   Did the urethane paint you used require a cross linker or was it another pr…"

lhedrick replied Jan 22, 2011 to Deck and floor paint products.

 7 Jan 22, 2011
Reply by Lawrence E. Long

"Since the impeller in an outboard jet is 90 degrees from the intake it makes sense i…"

lhedrick replied Jan 19, 2011 to Wooden Drifter/Jet - River Video

 20 Jan 20, 2011
Reply by Don Wakefield

"Outstanding.   It looks like it tracks great.  Did you ever consider a jet outboard…"

lhedrick replied Jan 18, 2011 to Wooden Drifter/Jet - River Video

 20 Jan 20, 2011
Reply by Don Wakefield

"When we build stitch and glue boats we build up the chine with may layers of glass.…"

lhedrick replied Jan 18, 2011 to Wrapped Frames

 11 Jan 18, 2011
Reply by lhedrick

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service