Phillip Westendorf's Discussions (644)

Discussions Replied To (638) Replies Latest Activity

"Brett, Woodcraft, Rockler or Lee Valley sells a set of hollow drills that will drill…"

Phillip Westendorf replied Nov 21, 2015 to new to posting on site

14 Nov 25, 2015
Reply by brett wolfe

"Brett,  I had the same problem removing the SS Screws after the epoxy set-up around…"

Phillip Westendorf replied Nov 20, 2015 to new to posting on site

14 Nov 25, 2015
Reply by brett wolfe

"Mike, I used a standard Stainless Steel Marine Eye Bolt for the stem.  The studs wer…"

Phillip Westendorf replied Nov 10, 2015 to Trailer Drawings

118 Jul 13, 2019
Reply by Bennett Yarbrough

"Mike, If the battery packs are held together with small screws (as opposed to ultras…"

Phillip Westendorf replied Nov 10, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Rob, Go to West's Website.  They have epoxy repair kits.  Here's a link.   http://ww…"

Phillip Westendorf replied Nov 6, 2015 to Repair Advice

12 Nov 8, 2015
Reply by Mike Thomas

"Mike, Still a great looking boat!  It'll be a beauty when you get her complete. Dorf"

Phillip Westendorf replied Nov 3, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, When you get all the pieces in place take the belt sander and make everything…"

Phillip Westendorf replied Nov 3, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, I added the chines to the bottom edge with ss screws at each frame to hold the…"

Phillip Westendorf replied Nov 2, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Al,  Here's the result I got on my canoe in 2014 when I added two more coats of varn…"

Phillip Westendorf replied Nov 1, 2015 to Buffing out varinsh

17 Nov 23, 2015
Reply by Al Strom

"Al, Tungsten and Rick have it "right", just one other thing I have found works for m…"

Phillip Westendorf replied Nov 1, 2015 to Buffing out varinsh

17 Nov 23, 2015
Reply by Al Strom

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service