Mike Baker's Discussions (385)

Discussions Replied To (369) Replies Latest Activity

"No it won't throw anything off, especially on that boat it is a pretty chill boat (n…"

Mike Baker replied Mar 17, 2015 to 16' Double ender w/transom - panel length

4 Mar 17, 2015
Reply by Mike Baker

"Hey David, You can leave the panel length as is. You will probably need to either mo…"

Mike Baker replied Mar 17, 2015 to 16' Double ender w/transom - panel length

4 Mar 17, 2015
Reply by Mike Baker

"Hey Robert, The distance between the gunnels typically is 1 1/2" to allow for an oar…"

Mike Baker replied Mar 17, 2015 to I'm trying to decide on a finish for z-drifter build

17 Mar 21, 2015
Reply by Robert

"Hey Terry, I would not use a bow mount for rivers, the boat will swing around when a…"

Mike Baker replied Mar 17, 2015 to Bow mount anchor question

11 Apr 10, 2015
Reply by craig curtis

"Steam steam steam! It makes building so much more enjoyable! Mike"

Mike Baker replied Mar 5, 2015 to hull assembly

41 Aug 5, 2015
Reply by Justin McEntire

"Hey Dobie, Perfectly acceptable. 1/2" + 1/4" would work also> Mike"

Mike Baker replied Feb 19, 2015 to Transom question

3 Feb 19, 2015
Reply by Lawrence E. Long

"Yes Rick I think that is the boat. I talked to the guy at the show. Doing the strips…"

Mike Baker replied Feb 12, 2015 to homemade plywood

9 Feb 12, 2015
Reply by Mike Baker

"Hey Bob, An alternative to making your own plywood would be to do 1/4" thick strips…"

Mike Baker replied Feb 12, 2015 to homemade plywood

9 Feb 12, 2015
Reply by Mike Baker

"Hey Craig, The one I like is System Three Spar urethane. It has more body than other…"

Mike Baker replied Feb 6, 2015 to Epifanes Varnish

12 Feb 6, 2015
Reply by Mike Baker

"Good advice. I have use the biax. before, been a while and don't remember if it was…"

Mike Baker replied Feb 5, 2015 to panel strength

22 Feb 17, 2016
Reply by Chris

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service