Phillip Westendorf's Discussions (644)

Discussions Replied To (638) Replies Latest Activity

"Mark, It's not Coat It, the bottom has two layers of 6 oz. glass each buried in 4 co…"

Phillip Westendorf replied Oct 19, 2015 to Drift Boat Project #3

135 Jul 31, 2020
Reply by CWarmouth

"Another Transom Pic. The dark spots that you might think are screws are 1/4" dia. W…"

Phillip Westendorf replied Oct 19, 2015 to Drift Boat Project #3

135 Jul 31, 2020
Reply by CWarmouth

"CW, Just thinking that if you add an epoxy filet radius (~3/8" R)  between the botto…"

Phillip Westendorf replied Oct 15, 2015 to Drift Boat Project #3

135 Jul 31, 2020
Reply by CWarmouth

"Mike, I'd knock off the sharp corners on the front piece, as it's going to take the…"

Phillip Westendorf replied Oct 15, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, I found this on another site.  It addresses the humidity issue I referred to a…"

Phillip Westendorf replied Sep 19, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, When you add the glass with the flaws in it just make sure the glass is satura…"

Phillip Westendorf replied Sep 19, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, Today I was in Northwood's in Pinconning and saw the brass plugs for $ 6.99 ea…"

Phillip Westendorf replied Sep 10, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"CW, In addition to the cloth You need to consider the epoxy too.  West's 105/207 is…"

Phillip Westendorf replied Sep 10, 2015 to 10 oz. v. 6 oz.

3 Sep 24, 2015
Reply by lhedrick

"The most recent Epoxyworks Magazine from West System arrived the other day and has a…"

Phillip Westendorf replied Sep 10, 2015 to adhesives for frames

13 Sep 10, 2015
Reply by Phillip Westendorf

"Mike, When you glass the sides trim the glass at the stem even with the end of the p…"

Phillip Westendorf replied Sep 8, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service