lhedrick's Discussions (325)

Search Forum

View

Discussions Replied To (307) Replies Latest Activity

"I know someone who has tried it and never used it all up. I mix my only fillet compo…"

lhedrick replied Jul 18, 2009 to EZ Fillet

 6 Jul 21, 2009
Reply by Jason Knight

"That is a very good question. After cure like 48 hours new layers will not chemicall…"

lhedrick replied Jun 25, 2009 to Best Epoxy, System 3 vs West Marine?

 6 Jun 29, 2009
Reply by Jason Knight

"Another method is to push thickened epoxy into the crack or onto any fibers which st…"

lhedrick replied Jun 24, 2009 to How to repair plywood side of 16ft drift boat when boat rolled over lead anchor in thunderstorm on Deschutes

 5 Jun 24, 2009
Reply by Steve Siler

"I agree that weight down low is better then up at the gunwale, but just like the iss…"

lhedrick replied Jun 20, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

"Well, Darrell your are in for a surprise if you are staying at Sundance. I live abou…"

lhedrick replied Jun 19, 2009 to Bottom repair line-x

 19 Aug 1, 2010
Reply by Joseph Podesta

"In my view weight is never an issue. If I could build a boat which was zero pounds I…"

lhedrick replied Jun 18, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

"First, you can get it in 5 X 10 foot sheets. This means you are not stuck with a 48…"

lhedrick replied Jun 17, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

"My current white water boat uses kevlar. Place a piece of glass cloth on top of a p…"

lhedrick replied Jun 17, 2009 to Kevlar

 13 Jun 20, 2009
Reply by Randy Dersham

"Let's just say 2500.00 for a boat (round numbers). The subject of oars is a major re…"

lhedrick replied Jun 11, 2009 to Drift Boat Design

 5 Jun 11, 2009
Reply by lhedrick

"Quoting Randy "There aren't many straight lines on a drift boat ". When you look at…"

lhedrick replied Jun 6, 2009 to Plans??? I want to build a first boat need some starting advice.

 19 Jul 18, 2009
Reply by paulv

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service