Dave Z's Discussions (650)

Search Forum

View

Discussions Replied To (596) Replies Latest Activity

"Work in small sections. Plane that wood down to 5/8 or even 1/2" thick.  1-1/4" scre…"

Dave Z replied Apr 14, 2011 to Chine Batten

 8 Apr 17, 2011
Reply by Ben Kittell

"I've seen the fiber in the material as  you have.  also, soem of the interior plies…"

Dave Z replied Apr 14, 2011 to cutting the scarf

 19 Apr 30, 2011
Reply by Jeremy Christensen

"use wax paper from the kitchen on y0our work surface and on top of your scarf for sq…"

Dave Z replied Apr 13, 2011 to Epoxy or 3M-5200

 6 Apr 13, 2011
Reply by Dave Z

"Echo what he said-  buy your wood from as close to the source as you can- find a saw…"

Dave Z replied Apr 13, 2011 to Why not Red Oak

 29 May 6, 2012
Reply by Jacob Nelson

"...cabinets from 1993.  thats pretty funny."

Dave Z replied Apr 13, 2011 to Why not Red Oak

 29 May 6, 2012
Reply by Jacob Nelson

"oil the hell out of it.  the only thing varnished on my boats are seat tops and exte…"

Dave Z replied Apr 12, 2011 to Oil chine batten?

 1 Apr 12, 2011
Reply by Dave Z

"Randy,   How were the "first offs" of many of the original boats made?  What I meant…"

Dave Z replied Apr 7, 2011 to Plywood Scarfs and How Many Sheets

 9 Apr 7, 2011
Reply by Randy Dersham

"I think i have documented somewhere the transom adjustment for a don hill 16 footer…"

Dave Z replied Apr 6, 2011 to Plywood Scarfs and How Many Sheets

 9 Apr 7, 2011
Reply by Randy Dersham

"Jack,   you want fine dust, not sure the table saw willl get you fine enough dust. …"

Dave Z replied Apr 1, 2011 to Which epoxy?

 5 Apr 1, 2011
Reply by Dave P

"For general epoxy work- RAKA.  www.raka.com  I've used this on countless projects an…"

Dave Z replied Mar 31, 2011 to Which epoxy?

 5 Apr 1, 2011
Reply by Dave P

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service