Dave Barnes's Discussions (41)

Discussions Replied To (40) Replies Latest Activity

"This is very valuable information for the stem on my next build. What was the name o…"

Dave Barnes replied Mar 22, 2012 to Stem Material?

23 Mar 26, 2012
Reply by Michael Rosso

"I used the West system epoxy resin and hardeners and I don't remember it being too b…"

Dave Barnes replied Mar 13, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"See? now you're building a really short boat."

Dave Barnes replied Mar 9, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"The fifth photo above really shows the optical illusion. All the pieces have the sam…"

Dave Barnes replied Mar 9, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Hmmmm. It looks like the amidships will have much more vertical sides than the stern…"

Dave Barnes replied Mar 8, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Hand rails?"

Dave Barnes replied Mar 2, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"By the way, saw a Montana Boat Builder driftboat at the Fly Fishing show this weeken…"

Dave Barnes replied Feb 27, 2012 to Stitch and glue drift boats

15 Feb 29, 2012
Reply by Dave Tishler

"As a newbie boat builder, I was concerned about ease of build and the ease of walkin…"

Dave Barnes replied Feb 27, 2012 to Stitch and glue drift boats

15 Feb 29, 2012
Reply by Dave Tishler

"Very nice work, Guy!  I had done a quick calculation that said the weight of 3 guys…"

Dave Barnes replied Feb 22, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I used 5/8 on the bottom and 3/8 on the sides. a lot of the strength comes from the…"

Dave Barnes replied Feb 9, 2012 to Plywood thickness

18 Feb 10, 2012
Reply by Michael Rosso

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service