Randy Dersham's Discussions (571)

Search Forum

View

Discussions Replied To (537) Replies Latest Activity

"Forgot to answer the first question. We bed the notches because it protects the chin…"

Randy Dersham replied Oct 26, 2010 to Inside Chine ?

 5 Oct 26, 2010
Reply by Dave Z

"I recommend that you use the method that was first used on your boat. There are tw…"

Randy Dersham replied Oct 26, 2010 to Inside Chine ?

 5 Oct 26, 2010
Reply by Dave Z

"The old school way is to sand off the old finish at the ends of the finish to bare w…"

Randy Dersham replied Oct 26, 2010 to Oar Repair

 3 Oct 31, 2010
Reply by mitchell

"Red Oak is shorter grained than White Oak so is more brittle. It is also less rot re…"

Randy Dersham replied Oct 26, 2010 to Why not Red Oak

 29 May 6, 2012
Reply by Jacob Nelson

"The rub rails were made to prevent the tires from a Model A axle trailer from rubbin…"

Randy Dersham replied Oct 20, 2010 to rub boards

 5 Oct 20, 2010
Reply by Chris Anderson

"These do work great Michael. I recommend that you stake the corners with a very heav…"

Randy Dersham replied Sep 22, 2010 to Boat Storage

 5 Oct 12, 2010
Reply by michael chnya

"System Three WR-LPU is good stuff and very similar to what you describe. The reason…"

Randy Dersham replied Sep 21, 2010 to Boat Coating News

 14 Oct 12, 2010
Reply by michael chnya

"Glen L has a great web resource for boat building woods. You can find it by CLICKING…"

Randy Dersham replied Sep 6, 2010 to useing redwood for gunwhales

 5 Sep 13, 2010
Reply by Brad Dimock

"Thanks for the correction Roger. I always seem to get the first initial right and th…"

Randy Dersham replied Aug 30, 2010 to Drift Pram?

 17 Mar 7, 2013
Reply by Tom Anderson

"Prams RULE! Here is my adaptation of the boat that Roger has in his book. I thin…"

Randy Dersham replied Aug 29, 2010 to Drift Pram?

 17 Mar 7, 2013
Reply by Tom Anderson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service