tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

" "I don't plan on standing in this boat to fish" have you ever been in a little pram…"

tungsten replied Aug 19, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"Thats one thing about designing your own,no one can answer how it will float or carr…"

tungsten replied Aug 19, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"Ken, there have been many weekend boats built with just screws and cheap paint.Your…"

tungsten replied Aug 19, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"thats a funny looking break,no long splinters.or is this how white oak breaks?"

tungsten replied Aug 17, 2012 to Snap, Crackle, Pop!

 13 Sep 26, 2012
Reply by Rick Newman

"ya just play with what you got,i had 1/8" sheet good scraps that i could cut pretty…"

tungsten replied Aug 15, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"Its a foam bottom so lots of glass planned,as it sits with side glass on and inside…"

tungsten replied Aug 15, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"yes thats the model under the model,kinda skiffish. the LOA is 11'5, floor 48" with…"

tungsten replied Aug 15, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"You could put a little  dead rise or V in the first 20" or so,but i dont think you;l…"

tungsten replied Aug 15, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"I've done some  research and measured other boats and came up with about 8" of rocke…"

tungsten replied Aug 11, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

"Well i guess this depends on what kind off water your floating,I simply just put les…"

tungsten replied Aug 11, 2012 to 10 ft pram design help

 50 Dec 17, 2012
Reply by Ken Shindledecker

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service