Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"Wow! great looking job. Fir is still stronger than Hydrotek. The problem is it is s…"

Randy Dersham replied May 1, 2009 to What to do with the bottom of this boat?

4 May 1, 2009
Reply by Tom Martin

"Larry you are correct that one is not better than the other. Each method has its com…"

Randy Dersham replied Apr 29, 2009 to A different chine for framed boats

12 Apr 30, 2009
Reply by Karl Mueller

"That's easy.... there so pretty! The half rounds don't catch on things and don't add…"

Randy Dersham replied Apr 29, 2009 to A different chine for framed boats

12 Apr 30, 2009
Reply by Karl Mueller

"I think what you are bringing up is two important issues critical to boat performanc…"

Randy Dersham replied Apr 29, 2009 to A different chine for framed boats

12 Apr 30, 2009
Reply by Karl Mueller

"It will be good to meet up Rick. See you there. I'm sure we can find some way to put…"

Randy Dersham replied Apr 23, 2009 to How much paint?

5 Apr 23, 2009
Reply by Randy Dersham

"We recommend two quarts of primer and one quart of finish coat for the outside of a…"

Randy Dersham replied Apr 22, 2009 to How much paint?

5 Apr 23, 2009
Reply by Randy Dersham

"Hello Dale, I think you should match the wood that is currently in your boat. It is…"

Randy Dersham replied Apr 18, 2009 to replacing side frame and floor frame

1 Apr 18, 2009
Reply by Randy Dersham

"Yup, you guys are right about the price of the seat. It's a great seat but like any…"

Randy Dersham replied Apr 15, 2009 to Alternative to the Rope Seat

8 Apr 15, 2009
Reply by Jesse Ronnow

"Yes Brian, pulling off the chine cap and replacing it with proper bedding will likel…"

Randy Dersham replied Apr 9, 2009 to Refinishing Rookie

14 Jul 21, 2009
Reply by Mary Mackenzie

"We use Port Orford Cedar under the hatch opening and around the hatch lid. The cedar…"

Randy Dersham replied Apr 6, 2009 to Hatch covers

1 Apr 6, 2009
Reply by Randy Dersham

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service