tungsten's Discussions (373)

Search Forum

View

Discussions Replied To (367) Replies Latest Activity

"Boat looks great,after you feather the blades down yes i would glass the bottom 6" e…"

tungsten replied Mar 19, 2016 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"I think your on the right track,I have a modified V jon with a 60/40 jet.The V helps…"

tungsten replied Mar 9, 2016 to Design Idea

 10 Mar 15, 2016
Reply by Jason Knight

"The 18' Hyde power drifter has a flat bottom with a tunnel,where i fish you can here…"

tungsten replied Mar 8, 2016 to Design Idea

 10 Mar 15, 2016
Reply by Jason Knight

"All looks good,i guess pending on the anchor weight that may be a little close to th…"

tungsten replied Mar 2, 2016 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"What did you end up doing for the damage on the side?Syringe and epoxy?"

tungsten replied Mar 1, 2016 to Repairing old and new damage on a Keith Steele 16 Drift Boat

 5 Mar 1, 2016
Reply by Rick Newman

"Green=not quite dry but dry enough the glass will cut without distorting trying to c…"

tungsten replied Feb 28, 2016 to Protecting drain hole while fiberglassing drift boat bottom

 11 Mar 1, 2016
Reply by Mike Thomas

"Not sure about the sculp wood thing.This is what i would do,first coat neat all over…"

tungsten replied Feb 28, 2016 to Protecting drain hole while fiberglassing drift boat bottom

 11 Mar 1, 2016
Reply by Mike Thomas

"Yes the Ve resin is stronger then the poly but it still doesn't stick very well to e…"

tungsten replied Feb 25, 2016 to your decision on finishes-colorado

 3 Feb 25, 2016
Reply by tungsten

"I would think they will end up quite paddle heavy,to get them to balance you'll need…"

tungsten replied Feb 23, 2016 to oar building

 17 Mar 24, 2016
Reply by Richard Elder

"wet test is really the only sure way.But if your configuration allows the seats/benc…"

tungsten replied Feb 17, 2016 to boat seating

 2 Feb 17, 2016
Reply by Rick Newman

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service