Eric Loudenslager's Discussions (127)

Search Forum

View

Discussions Replied To (125) Replies Latest Activity

"One strategy to make epoxy fillets easier is to put the mix in a plastic bag with on…"

Eric Loudenslager replied Nov 18, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Check out Devlin Boats. Stitch and Glue - there are several duck boats some motorize…"

Eric Loudenslager replied Nov 13, 2013 to Duck Boat???

 1 Nov 13, 2013
Reply by Eric Loudenslager

"Ken, There are almost limitless possibilities that could serve your purpose. All wou…"

Eric Loudenslager replied Nov 12, 2013 to Pram Design Help Wanted/Needed!

 77 Nov 16, 2013
Reply by Ken Shindledecker

"Stem hight on Hindman is 29"; Honky Dory is 29"; Buffalo Boat is 26". The angle cut…"

Eric Loudenslager replied Nov 10, 2013 to Model material?

 16 Dec 2, 2013
Reply by Andrew

"side panels are made from 1/32, and bottom and transom from 1/16 in stock. I have no…"

Eric Loudenslager replied Nov 9, 2013 to Model material?

 16 Dec 2, 2013
Reply by Andrew

"Tungsten, Based on your boat 011.jpg picture I gather you built open-side up without…"

Eric Loudenslager replied Nov 8, 2013 to Pram Design Help Wanted/Needed!

 77 Nov 16, 2013
Reply by Ken Shindledecker

"Regarding taper - Optimally an oar will be nicely balanced. You want enough weight i…"

Eric Loudenslager replied Oct 18, 2013 to First ever Post...First ever Project....Sassafras Oars

 15 Oct 19, 2013
Reply by Casey H

"I've made a pair of Alaskan Yellow Cedar oars, with laminated blades but without lam…"

Eric Loudenslager replied Oct 17, 2013 to First ever Post...First ever Project....Sassafras Oars

 15 Oct 19, 2013
Reply by Casey H

"If using plain weave it would be best to apply it at about a 45 degree angle to the…"

Eric Loudenslager replied Oct 9, 2013 to Technique question on applying 5oz plain weave Kevlar to bottom of boat.

 4 Oct 10, 2013
Reply by lhedrick

"Amine blush can be removed with water....warm with a little soap will take of that i…"

Eric Loudenslager replied Jul 1, 2013 to Fiberglass/Epoxy Question

 10 Jul 6, 2013
Reply by Jason Knight

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service