tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

"http://www.riverstouch.com/PramOrder.htm"

tungsten replied Jan 31, 2016 to Plans for framed pram

 2 Feb 1, 2016
Reply by John Woodward

"Cool boat!When you where sanding you would have been able to smell what the previous…"

tungsten replied Jan 31, 2016 to Starting a Steele 16 drift boat restoration

 54 Jul 17, 2016
Reply by Kirk Miller

"Allows the seat to be lower also  with the lower floor"

tungsten replied Jan 30, 2016 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Nice work,the frames look to hold it all  nice and fair."

tungsten replied Jan 25, 2016 to Eric's drift boat build

 6 Feb 1, 2016
Reply by Eric Berry

"If the ply(deck) is getting epoxy then glass the underside at the same time, this wi…"

tungsten replied Jan 25, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"If its current your wanting to anchor in then weight really helps.a 30 lb pyramid wi…"

tungsten replied Jan 24, 2016 to Anchors

 19 Jan 30, 2016
Reply by David Witton

"When i use to use a heat gun on a regular basis the cheap ones went about a month,th…"

tungsten replied Jan 23, 2016 to Looking for advice on Heat Gun purchase

 11 Apr 15, 2016
Reply by Kirk Miller

"Here's a pic of my bench with the swivel seat, hard to see but looks like bench is 1…"

tungsten replied Jan 17, 2016 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"You removed the fiberglass mat?Just a typo?You mean glass yes? typically too much ha…"

tungsten replied Jan 17, 2016 to Epoxy mix pumps

 16 Jan 23, 2016
Reply by chris towles

"Once you get the fly line deck and knee brace in it should look ok.Good spot for a p…"

tungsten replied Jan 13, 2016 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service