David Witton's Discussions (248)

Search Forum

View

Discussions Replied To (242) Replies Latest Activity

"I'd recommend getting a copy of Roger Fletcher's book "Drift Boats and River Dories"…"

David Witton replied May 21, 2018 to Strongback and instructions

 3 May 21, 2018
Reply by Mike Baker

"When I was building my boat, I was told that for 10 oz of cloth, I'd need 10 oz of r…"

David Witton replied Apr 3, 2018 to Estimating resin qualtities

 8 May 27, 2018
Reply by chris towles

"You're right - the frames (side and bottom) are all cut from 3/4" stock. The dispari…"

David Witton replied Feb 26, 2018 to First build

 249 Apr 20, 2023
Reply by Dusty

"Correct, the skin on one side is cut. This allows the product to be used to create c…"

David Witton replied Feb 12, 2018 to Plascore alternatives

 3 Feb 12, 2018
Reply by David Witton

"I settled on Nidacore - since it can be folded, it's much cheaper to ship. "

David Witton replied Feb 12, 2018 to Plascore alternatives

 3 Feb 12, 2018
Reply by David Witton

"I rounded everything in my boat except the chine logs - can't see how it will cause…"

David Witton replied Jan 26, 2018 to Baker 17x54 build

 298 Feb 10, 2025
Reply by Bennett Yarbrough

"I used a router jig with a flush trim bit, but a hand plane would work just fine.  "

David Witton replied Jan 17, 2018 to First build

 249 Apr 20, 2023
Reply by Dusty

"Thanks for getting this fixed. "

David Witton replied Jan 13, 2018 to New URL and getting back on track

 9 Jan 18, 2018
Reply by Rick Newman

"Clear packing tape works well also. You'll find that dried epoxy can be worked with…"

David Witton replied Jan 10, 2018 to First build

 249 Apr 20, 2023
Reply by Dusty

"I laid a sheet of melamine under the hydrotec with a strip of blue tape along the ed…"

David Witton replied Jan 2, 2018 to First build

 249 Apr 20, 2023
Reply by Dusty

RSS

© 2026   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service