tungsten's Discussions (370)

Search Forum

View

Discussions Replied To (364) Replies Latest Activity

"Pending on the water you like to float any design can be altered or equally scaled u…"

tungsten replied Jan 2, 2016 to Boat plans

 7 Jan 2, 2016
Reply by Eric Loudenslager

"Works really well when layin multiple layers of glass or on inside seams.Also when u…"

tungsten replied Dec 23, 2015 to fiberglassing sides and bottom

 13 Dec 23, 2015
Reply by Mike Thomas

"Don't forget the all important bubble buster aluminum roller on heavier glass,really…"

tungsten replied Dec 22, 2015 to fiberglassing sides and bottom

 13 Dec 23, 2015
Reply by Mike Thomas

"Poly resin (gel coat) wont stick very well to the epoxy or plywood."

tungsten replied Dec 21, 2015 to fiberglassing sides and bottom

 13 Dec 23, 2015
Reply by Mike Thomas

"Don't forget the beer holder up front:),I've also seen people recessing magnets in t…"

tungsten replied Dec 17, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Yes,you can always add more later.With the ply and frames on the inside its a little…"

tungsten replied Dec 6, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Yes you can sand and add glass,i guess i missed that you did the graphite already. 1…"

tungsten replied Dec 5, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

" I guess it all depends on how much the boat will see rocks?Maybe hold off on the gr…"

tungsten replied Dec 5, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Oh and a gallon of resin is about 9 lbs"

tungsten replied Nov 21, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"18 or 12oz? You wrote 12 oz earlier you need at least the same amount of resin as yo…"

tungsten replied Nov 21, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service