Dave P's Discussions (23)

Search Forum

View

Discussions Replied To (17) Replies Latest Activity

"You never cease to amaze me Brad!"

Dave P replied Jul 3, 2013 to oarlock bushings

 16 May 10, 2014
Reply by Randy Dersham

"Sounds like you found them. I got mine from allegiscorp.com."

Dave P replied Jun 26, 2012 to Southco Cam Levers

 9 Jun 26, 2012
Reply by Jim Rubino

"I made these 10 ft ash oars last year with the help of WBP. It just so happens that…"

Dave P replied Feb 24, 2012 to update sitka spruce oars

 13 Mar 11, 2012
Reply by Phillip Westendorf

"Mike, you pointed out another mistake I was making. I assumed (yeah I know the acron…"

Dave P replied Feb 7, 2012 to Frame Angles & Bevels

 10 Feb 7, 2012
Reply by Dave P

"Instead of cutting the inside of the side frame at the proper angle all the way (as…"

Dave P replied Feb 6, 2012 to Frame Angles & Bevels

 10 Feb 7, 2012
Reply by Dave P

"Good tip Mike, that's what I was concerned about, the gap wasn't enough. Plus I was…"

Dave P replied Feb 6, 2012 to Frame Angles & Bevels

 10 Feb 7, 2012
Reply by Dave P

"So the measurement is right angle to the side and not across at the cut? Boy I was w…"

Dave P replied Feb 5, 2012 to Frame Angles & Bevels

 10 Feb 7, 2012
Reply by Dave P

"I got my plans from Andy H. And for a beginner boat builder the plans AND advice wer…"

Dave P replied Jul 13, 2011 to Double Ender White water Dory

 17 Aug 20, 2011
Reply by lhedrick

"Wow, your daughter plays very well! You also!"

Dave P replied Apr 1, 2011 to Which epoxy?

 5 Apr 1, 2011
Reply by Dave P

"Good timing on this subject. When I bought all the wood for my boat, I included some…"

Dave P replied Dec 16, 2010 to Let's hear more about oars.

 26 Jan 21, 2011
Reply by Lawrence E. Long

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service