I've spoken with several wood boat builders who are starting to experiment with Plascore and had a few questions:
Is it used in conjunction with plywood?
How do you attached it?
How is it seemed?
Just the honeycomb or panels?
What do you coat it with if used on a boats bottom?
Bob you voice some good points about cores. I won't ask for more here as this is a wood forum. It would be great for you to check the forum at montana-riverboats.com where many of us are looking for wood alternatives.
Every time I buy plywood it seems worse then the previous year and costs more. I wonder what it will be like 25 years from now?
Bob, your responses was exactly the sort of thing I was looking for when I started this post. I found your technical insight quite interesting and hope you continue to offer your perspective. This forum is about building wooden boats but when new and advanced products start becoming integrated with wood it's important everyone gets insight from those who have experience with them.
RE> "I would not use honeycomb core"
This sounds authoritative and confident. But it misses several points. You seem to be talking hypothetically. Larry and I and others (Jason Cajune) have been building with honeycomb core for years now. I hope to experiment with CoreCell and/or DiviniCell foam soon. But I do know I prefer honeycomb core to plywood (for the bottom panel anyway). So. Several points:
Who are we talking about? The boat buying public at large or the do-it-yourself boat builder? Boat builders tend to be careful rowers. I've been making drift boats since 1979. I use my boats hard. But don't hit very hard. Not often. I pay attention. I read the water. I row with skill. When I do smack a rock I fix it.
Yes, delamination is a problem with honeycomb core. But it's a problem with plywood too. Honeycomb core is patchable. I do it all the time.
Honeycomb core does NOT necessarily depend on a thick heavy fiberglass outside bottom. 4 or 5 layers of 6 to 10oz glass makes a stout bottom that is STILL lighter than plywood (if that plywood is glassed, perhaps with a few less layers).
A bottom like that will get dinged. If you are a consumer you're stuck. You have to go back to the boat dealer and beg for mercy. If you are a boat builder you just fix it. Plywood skinned in glass is far more trouble in the long run.