Varnishing and color/gloss restorer

Made the mistake of varnishing the inside of my boat. Someone suggested that after the varnished had cured, I could sand with 2000 grit paper and then use the 3M color/gloss restorer which is for gel coat to obtain a smooth as glass finish. Has anyone been foolish enough to try this.     

Views: 190

▶ Reply to This

Replies to This Discussion

Permalink Reply by Rick Newman on March 14, 2014 at 8:29am

No I haven't but it is a common method to achieve a very smooth finish. I actually have the products to do such an operation but never did.

Rick N

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service