Sort by: View
Discussions | Replies | Latest Activity |
---|---|---|
Owyhee River Info Needed!Some boating buddies and I are trying to plan a Rome to Birch Creek float somewhere around the middle of May. None of us have ever been dow… Started by Mike Dearing in General Forum |
8 |
Mar 20, 2009 Reply by Mike Dearing |
Boat Repairs in the Field?I asked TJ a question about the repairs he made to his boat after an accident he had on the way to the river, but this got me thinking, doe… Started by Mike Dearing in General Forum |
13 |
Mar 20, 2009 Reply by Herb Jacobsen |
DeeksRandy, You mentioned... last week I think, that you were in contact with the new distributor for Deeks. Any word on testing? And if all go… Started by Jesse Ronnow in General Forum |
11 |
Mar 20, 2009 Reply by Dave Z |
oar lenth?I'm building a 17' whitewater dory. What size oars should I build or buy. I'm on a very limited budget. Den in Portsmouth NH Started by Den in General Forum |
6 |
Mar 19, 2009 Reply by Mike Dearing |
Two questionsFirst question. I am going to install my rub strips. 3M and a few screws to fit them to the sides? Second question. I am using alaskan yel… Started by E. Landis in General Forum |
1 |
Mar 18, 2009 Reply by Randy Dersham |
Restoring life to dried out woodThe wood from the rowers area to front is definitely dried out and has some cracking, nothing to bad though. It has a gray tone it, in the… Started by Brad in General Forum |
2 |
Mar 18, 2009 Reply by Brad |
Floor BoardsI am to the point on my restore where I need to redo my floor boards. I have decided to use Cedar at a thickness of about 5/8" and a width… Started by Jesse Ronnow in General Forum |
24 |
Mar 18, 2009 Reply by Jesse Ronnow |
Stripping agentsWell, I bought some 3M Safest Strip for paint and varnish, but it doesn't really work on my boat. I let the 3M cure for 2 hours, and still… Started by Brad in General Forum |
4 |
Mar 16, 2009 Reply by Brad |
Stem/Transom, Screw QuestionOk - So on a painted boat is is commonplace to plug the screw holes on the stem and transom? I usually see the screw pattern and it looks n… Started by Jason Knight in General Forum |
16 |
Mar 16, 2009 Reply by Greg Hatten |
New blog post- hull assemblywatch my boat progress here: www.thtchronicles.blogspot.com Dave Started by Dave Z in General Forum |
5 |
Mar 16, 2009 Reply by Dave Z |
© 2025 Created by Randy Dersham. Powered by