Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,013)
| Discussions | Replies | Latest Activity |
|---|---|---|
Hole in the boat@!@!Sorry that was mostly to get your attention. I dont have a hole in my boat persay, what I have is an I-bolt in the front where the two side… Started by Brad in General Forum |
3 |
Mar 16, 2009 Reply by Brad |
plastic bottomI'm planning on putting a 1/4 or even 1/8 inch of plastic as a second bottom. First to protect the wood bottom but even more inportantly to… Started by Den in General Forum |
2 |
Mar 16, 2009 Reply by Jason Knight |
Fly Fishing Features...Here's a couple of things I added to the boat to make it "fly fishin friendly"... hope you like them. I took a leather strap, glued velcro… Started by Greg Hatten in General Forum |
10 |
Mar 15, 2009 Reply by Greg Hatten |
plastic bottomI'm planning on putting a 1/4 or even 1/8 inch of plastic as a second bottom. First to protect the wood bottom but even more inportantly to… Started by Den in General Forum |
0 | Mar 12, 2009 |
What are the personal "touches" you added to make your boat unique??One of the best parts of attending the McKenzie River Wooden Boat Festival is looking at all the wooden boats and seeing the unique ways we… Started by Greg Hatten in General Forum |
11 |
Mar 11, 2009 Reply by sanderson |
Port Ludlow PramDoes anyone have a picture/ plans any info on these boats? Thanks, Tim Started by Tim Ugaldea in General Forum |
1 |
Mar 11, 2009 Reply by Randy Dersham |
Sanding interiorWell, it has come time to sand the old boat's interior (first time in my 4 years of ownership). Really only the fore section, and the rower… Started by Brad in General Forum |
2 |
Mar 10, 2009 Reply by Brad |
Install Ribs and Chines with 3M 5200?Are most of you guys screwing and gluing your ribs/chines into place? I just watched the video that came with my Don Hill plans and they ju… Started by E. Landis in General Forum |
3 |
Mar 9, 2009 Reply by Dave Z |
Bedding Bottom in 3M 5200Ok - so I getting close to putting the bottom on my boat. Got it rough cut last night and am hoping to get it screwed and glued in the next… Started by Jason Knight in General Forum |
14 |
Mar 9, 2009 Reply by Greg Hatten |
Interior OilsAs I have finally removed all the varnish from the inside of my boat, I have decided to oil the inside this go around. I have received some… Started by Jesse Ronnow in General Forum |
13 |
Mar 6, 2009 Reply by Roger Fletcher |
© 2025 Created by Randy Dersham.
Powered by
