Dave's Drift Pram 2.0- prototype build

I have been busy building this boat.  Going very well.  Decided to use all fir on this one.  Don't be alarmed on those footballs on the exterior panels- the inside faces are perfect. I bought the fir "scratch and dent" on sale for a very good price.

Plan is to have her flipped by sunday.

All designed up here guys...  The last month or so I have been playing arts and crafts at the kitchen table with posterboard, tape and scaled lumber.  After several attempts that never met my satisfaction, I think I've arrived at the new design.

I built a 1"=1' model this weekend after getting my final lines together.  Specs:

Sheer Length: 13'-0

Beam: 5'-7"

Bottom Width: 3'-10"

Side Height: 1'-9"

Im finalizing the bill of material and locating sources at the moment.  I hope to have this boat in the water by first week of May.

Check my blog for more pics and periodic updates.

www.thtchronicles.blogspot.com

Views: 1681

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ron Shealer on January 6, 2014 at 6:37pm

Anxious to see this full size!  Great stuff, I'll keep an eye on the blog.  Thanks for designing this.

Permalink Reply by Stephen Markley on January 24, 2014 at 8:59am

Awesome! This one looks great Dave!

Permalink Reply by Jason Knight on February 1, 2014 at 6:18am
This looks great Dave. I am going to get the little Z pram in the water as soon as the weather lets up here and see how it pushes around with that little outboard setup. Are you goin to offer a plan for this boat?
Permalink Reply by Dave Z on February 1, 2014 at 11:57am

Yessir there will be plans made available.  I'm in the material procurement phase, but ought to be making sawdust soon here if we ever get unfrozen!

Let us know how that little outboard does... im going to be outboarding the new boat too.

Permalink Reply by Dave Z on March 26, 2014 at 5:14pm
Permalink Reply by Stephen Markley on July 8, 2014 at 6:52pm

Dave...

It looks like your blog was deleted... I got a 404 when I went there. :(

Permalink Reply by Dave Z on July 11, 2014 at 9:21am

It was.  I closed it down.  Sorry for the inconvenience.  Let me know if there is anything you need to see or know about the boats.

Permalink Reply by Robert on March 2, 2015 at 10:28pm

Have you added another link to your plans?  I purchased your z-pram from River's Touch.  Beautiful boat.  Just about to put the sides to the frames and transoms.

I'm looking for a small pram, under 8', to build with elementary aged (12) students.  I picked up plans for the Moby Dink from Glen-L.  Boy, it's got curves.  I couldn't bend the chines without breaking.  I might add four inches to the bow and stern width, and take out some of the curve on the bottom.  I don't know how many people built the Moby Dink successfully.  Not many pics out there.  Any ideas?

Permalink Reply by Mark on June 23, 2015 at 6:23am

I'm getting broken links and latin pages from your link. I am currently building the Z drifter.Do use sikkens 391 for glueing penals to frames?

Permalink Reply by Rick Newman on June 23, 2015 at 8:41am

Dave has deleted the link. There are a variety of choices for fastening panels to the frames. Silicon-Bronze nails and epoxy, just nails or stainless steel screws. I suppose you could use sikkens 391 but I haven't heard of anyone doing it in the last few years that I have been hanging around here. Perhaps someone else can chime in here and give more advice.

Rick Newman

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service