Sawyer Squaretop Dynelite Oars

Has anyone used the Sawyer Squaretop Dynelite Oars and if so, how did you like them.

Views: 573

▶ Reply to This

Replies to This Discussion

Permalink Reply by Rick Newman on March 14, 2016 at 2:18pm

I have used a pair of them and loved them. I couldn't afford them so bought and rebuilt a used pair of Sawywers for $50. You can see how I did the rebuild on my page.

Rick

Permalink Reply by Jonathan Clarke on March 15, 2016 at 6:59pm

I rowed my friend's boat that he had equipped with Sawyer squaretops with the laminated wood shoal cut blades.  I loved the oars and wish I could afford them.

Permalink Reply by Vince Zounek on March 17, 2016 at 2:39pm

Thanks Rick and Jonathan, sounds good! I wanted the 9 ft Sawyer Smoker Dynelites with the Ash shafts and wide, (7in.) blades, but can't find a pair to buy. I have used these and really like them. Given all the troubles Sawyer is having now, they don't even have a pair to sell me. One of the Sawyer dealers near buy does have a pair of the Square Tops in stock. Just don't have any experience with them so that's why I'm asking for input. Thanks Again!!

Permalink Reply by Richard Elder on March 22, 2016 at 8:54am

Hi Vince,

I've a pair of custom built laminated oars for sale.  Wide blades, triple laminated shafts, UV resistant epoxy coated.  9'6" but could be easily shortened to 9'.  The NRS counterweights can be adjusted to make them weightless in the oarlocks or removed. $500.  Phone Three 07 Four one 3 five869

Attachments:
Permalink Reply by Vince Zounek on March 28, 2016 at 7:43am

Hi Richard,

I went ahead and bought the Square Top Sawyers but thanks anyway!!!!

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service