GC Dory-Double Ender Build

Hello,

Started on a GC Dory from Andy H. plans (18x54) some time ago and decided to post a few images from the build. The plans were put in CAD and cut on a CNC router so there are puzzle joints on large panels. A few modifications from the original design include laminated bow and stern posts and laminated gunwales. It has been a fun build and I am currently fiddling with gutters and hatches. See how this works and I will post more images.

Dave

Views: 3866

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Dave S on April 1, 2021 at 6:38pm

2 layers of 12 oz biax chine tape and 17 oz biax

Permalink Reply by Dave S on April 9, 2021 at 3:43pm

Bottom faired and graphite applied. Sides also primed and faired.

Permalink Reply by Dave S on April 9, 2021 at 3:45pm

Interior faired and tinted epoxy rolled on.

Permalink Reply by Dave S on April 9, 2021 at 3:47pm

Tacked in footwell.

Permalink Reply by Dave S on April 9, 2021 at 3:54pm

Fiberglass drain tube made from 12 oz biax wrapped around gift wrap tubes and paper. The Happy Birthday paper is staying inside permanently.

Permalink Reply by Dave S on April 9, 2021 at 3:55pm

Decks installed and ready for fiberglass tape.

Permalink Reply by Dave S on April 9, 2021 at 4:00pm

Taping hull to deck seam and deck to bulkhead seams.

Permalink Reply by Rick Newman on April 9, 2021 at 6:50pm

Wonderful work!

Rick N

Permalink Reply by Dave S on April 13, 2021 at 3:53pm

Oars pocket cutout.

Permalink Reply by Dave S on April 13, 2021 at 3:54pm

Front passenger seat fairing.

Permalink Reply by Dave S on April 13, 2021 at 3:56pm

Drain tube installed.

Permalink Reply by Dave S on April 13, 2021 at 4:02pm

Gutters installed. Currently working on fairing the interior for paint prep and hatch work.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service