Taper Jig

Hey guys,
Quick question in regards to using a taper jig for frames. Are you guys using a homemade jig or something manufactured? I am looking at a couple simple designs online. Let me know what you think.

Thanks!
Jason

Views: 384

▶ Reply to This

Replies to This Discussion

Permalink Reply by Rick Newman on March 9, 2013 at 12:18pm

Jason, two people for sure have recently showed info on taper jigs, Phil Dorfman and Guy Fredrickson. two Black Labs and others are mentioned when I did a search on the page for "taper jigs".


Rick Newman

PS Congratulations Dad! Does Christine really let you out to the shop to play now, what no diaper and bottle duty?

Permalink Reply by Jason Knight on March 9, 2013 at 12:57pm
Thanks Rick I will do a search for their jig setups.

Yes, this baby is our first, so I am in high demand right now!
And I am not allowed in the shop right now, that's why I am spending lots of time online inside (daydreaming of boat builds to come)
Permalink Reply by Rojo on March 9, 2013 at 1:50pm
Norm Abrams (This Old House/New Yankee Workshop) made a taper-jig for table legs. You may be able to use it. It's on YouTube.
Permalink Reply by Jason Knight on March 9, 2013 at 5:57pm
Found lots of info, thanks guys!
Permalink Reply by Jayson Hayes on March 11, 2013 at 5:38am

Jason, i have a pic of a taper jig i made on my recent blog post, if you would like more pics let me know

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service