Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
plywoood scarf jointsI am building a 18' drift boat and am wondering if anyone knows how to scarf the bottom 1/2 ply? I can do the lengthwise scarf, but I need… Started by Bryan McDade |
10 |
Mar 21, 2009 Reply by Dave Z |
Owyhee River Info Needed!Some boating buddies and I are trying to plan a Rome to Birch Creek float somewhere around the middle of May. None of us have ever been dow… Started by Mike Dearing |
8 |
Mar 20, 2009 Reply by Mike Dearing |
Boat Repairs in the Field?I asked TJ a question about the repairs he made to his boat after an accident he had on the way to the river, but this got me thinking, doe… Started by Mike Dearing |
13 |
Mar 20, 2009 Reply by Herb Jacobsen |
DeeksRandy, You mentioned... last week I think, that you were in contact with the new distributor for Deeks. Any word on testing? And if all go… Started by Jesse Ronnow |
11 |
Mar 20, 2009 Reply by Dave Z |
oar lenth?I'm building a 17' whitewater dory. What size oars should I build or buy. I'm on a very limited budget. Den in Portsmouth NH Started by Den |
6 |
Mar 19, 2009 Reply by Mike Dearing |
Two questionsFirst question. I am going to install my rub strips. 3M and a few screws to fit them to the sides? Second question. I am using alaskan yel… Started by E. Landis |
1 |
Mar 18, 2009 Reply by Randy Dersham |
Restoring life to dried out woodThe wood from the rowers area to front is definitely dried out and has some cracking, nothing to bad though. It has a gray tone it, in the… Started by Brad |
2 |
Mar 18, 2009 Reply by Brad |
Floor BoardsI am to the point on my restore where I need to redo my floor boards. I have decided to use Cedar at a thickness of about 5/8" and a width… Started by Jesse Ronnow |
24 |
Mar 18, 2009 Reply by Jesse Ronnow |
Stripping agentsWell, I bought some 3M Safest Strip for paint and varnish, but it doesn't really work on my boat. I let the 3M cure for 2 hours, and still… Started by Brad |
4 |
Mar 16, 2009 Reply by Brad |
Stem/Transom, Screw QuestionOk - So on a painted boat is is commonplace to plug the screw holes on the stem and transom? I usually see the screw pattern and it looks n… Started by Jason Knight |
16 |
Mar 16, 2009 Reply by Greg Hatten |
© 2025 Created by Randy Dersham.
Powered by