nuther craigslist rescue dog...I mean boat.

Got it home now;16',manufacture not yet known,needs lots of work,but not that bad if one can look around theobvious problems.I'll try to mo…

Started by JAY STRUGNELL in General Forum

New to me boat (revised with larger photos)

I've been lurking a while in anticipation of getting a boat. I have a friend I met through a Reel Recovery retreat who needed to let his dr…

Started by Dave Caravella in General Forum

Help - System 3 Silver Tip epoxy

Hello all, I am just starting my first boat build, I am building a Don Hill 16', and am just starting to get all of the materials together…

Started by Greg Jensen in General Forum

Formica skid shoe

Back in the eighties I guided a young guy who had an aluminum boat that had a Formica skid shoe. He came back the next weekend ( working my…

Started by Bob bryan in General Forum

Stern Casting Brace Help

Hey...need some advice on the fabrication of a rear(stern) casting brace for my boat.  I have seen many designs...any ideas as to a sturdy,…

Started by Christopher M. Gosselin in General Forum

Funny looking drift boat

Of my five grandkids, I have one granddaughter. She’s our youngest and is a high school senior. She asked me earlier this Fall, “Grandpa, w…

Started by Roger Fletcher in General Forum

Tatman Boats site

I've been trying to log into Randy's website for a couple of days now. I also tried calling but no answer. Is there something wrong at Tatm…

Started by Robert Puckett in General Forum

Hull "Checking" Question

Hey....I am a newby here....I am so excited to have found this site...My drift boat's hull is getting the "checking"  in the plywood...is t…

Started by Christopher M. Gosselin in General Forum

Dave Z's Drifter - In the Beginning

Started by Ron Shealer in General Forum