Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,011)
| Discussions | Replies | Latest Activity |
|---|---|---|
Steele Drift Boat Project Words of WisdomHello all! Here are a couple of picture of my latest project - a 14' Steele in relatively good shape. One is pre-pressure wash, the other… Started by John MacGillivray in General Forum |
7 |
Jan 25, 2011 Reply by John MacGillivray |
date on boat show?Hey Randy,saw that Easter weekend is the 23rd of April,will the boat show be on the 30th then?I'll be getting off the Grand on the 17th and… Started by Kevin C. in General Forum |
1 |
Jan 24, 2011 Reply by Randy Dersham |
bottom shoeI've got a 3/8 " ply and epoxy painted bottom on my 14' Ken Hankinson high side. After much pricing of materials and reading, I've given… Started by Peter Foster in General Forum |
8 |
Jan 23, 2011 Reply by Rick Newman |
Dry compartment gasket material?For those of you with dry compartments, what sort of gasket material do use use for the seal? Neoprene? Foam? Weather Stripping? Just look… Started by Joel Sauder in General Forum |
4 |
Jan 22, 2011 Reply by lhedrick |
Deck and floor paint products.For those who have painted floor boards or decks on boats, what have you used? The last deck I painted was done with a 2 part Interlux pa… Started by lhedrick in General Forum |
7 |
Jan 22, 2011 Reply by Lawrence E. Long |
Let's hear more about oars.I have a set of light 9 foot ash oars which I use while drift fishing. Way to soft for big water but for drifting I like them. Made by Sh… Started by lhedrick in General Forum |
26 |
Jan 21, 2011 Reply by Lawrence E. Long |
Wooden Drifter/Jet - River VideoTook the new wooden drifter sled out for the second time last Friday, this time on the Sacramento River near Chico. We did some video-ing… Started by Don Wakefield in General Forum |
20 |
Jan 20, 2011 Reply by Don Wakefield |
Thanks Wooden Boat PeopleThis forum has got to be one of the most open minded, interesting and informative sites on the internet. A year ago I knew nothing about bu… Started by Troy Nicolls in General Forum |
1 |
Jan 19, 2011 Reply by chris towles |
Wrapped FramesHas any one ever, or ever considered, wrapping their frames in fiberglass? Started by Jordan Davis in General Forum |
11 |
Jan 18, 2011 Reply by lhedrick |
Adding layer of plywd to bottom-HelpPeter in Portland here, with the 14' Ken Hankinson high side drifter (with the stressed skin design - no vertical ribs). It has 3/8 ply b… Started by Peter Foster in General Forum |
11 |
Jan 17, 2011 Reply by Kevin C. |
© 2024 Created by Randy Dersham.
Powered by
